AUTOLOG1 is typically only run at IPL time. If you haven't IPLed or executed AUTOLOG1 since IPL (and AUTOLOG1 should only run at IPL) then you will have to issue your command dynamically. Also after your ping ask the ARP table by doing a NETSTAT ARP ALL <controller machine> Where <controller machine> is the name of your controller machine. Do the NETSTAT command twice one second apart. If it is working you should see the IP and MAC of the gateway. David Mel Payne wrote:
Besides granting access for a user ID to a VSWITCH in AUTOLOG1's PROFILE EXEC, is there anything else that needs to be done for that user to use this network construct? I'm having an issue pinging the gateway from a new user ID, but on the surface, it appears to be coupled properly to the defined VSWITCH. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
