I'm curious. What format was the tape in? Tar, cpio, something else?
Mark Post -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Spann, Elizebeth (Betsie) Sent: Friday, June 09, 2006 2:38 PM To: [email protected] Subject: Re: HLASM on zLinux install Thank you, Mark. I did MOVEFILE on VM until I found the correct file on the tape; moved the drive to zLinux and ran dd. Used the Device Driver manual for sample commands. Appreciate your suggestion. BTW, it's mt_st rather than mt-st. Betsie -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Post, Mark K Sent: Thursday, June 08, 2006 1:37 PM To: [email protected] Subject: Re: HLASM on zLinux install Not quite sure what you're asking. To control the drive (rewind, etc.) you'll need the mt-st package. Other than that, I would try "dd"ing a megabyte or so down to disk and doing a "file" command on it to see what you've got. Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
