Hmm...
q cplevel
z/VM Version 5 Release 1.0, service level 0501 (64-bit)
Generated at 08/04/05 09:42:15 EDT
IPL at 08/29/05 16:09:31 EDT
Ready; T=0.01/0.01 10:39:09
It worked during install. I thought. Let's look closer.
total used free shared buffers cached
Mem: 505192 387088 118104 0 15456 286396
-/+ buffers/cache: 85236 419956
Swap: 194948 8 194940
[EMAIL PROTECTED]:~>
[EMAIL PROTECTED]:~> cat /proc/dasd/devices
0.0.0200(FBA ) at ( 94: 0) is dasda : active at blocksize: 512,
131072 blocks, 64 MB
0.0.0201(FBA ) at ( 94: 4) is dasdb : active at blocksize: 512,
262144 blocks, 128 MB
0.0.0202(ECKD) at ( 94: 8) is dasdc : active at blocksize: 4096,
601020 blocks, 2347 MB
0.0.0203(ECKD) at ( 94: 12) is dasdd : active at blocksize: 4096,
601020 blocks, 2347 MB
Hmm... Seems that even thought I set them up as DIAG they are still being
used a FBA
Setup Swap disk
DIAG swap disk defined at virtual address 200 (16245 4K pages of swap
space)
Setup Swap disk
DIAG swap disk defined at virtual address 201 (32493 4K pages of swap
space)
Loading dasd_mod
Loading dasd_fba_mod
Loading dasd_eckd_mod
Activating DASDs: 0.0.0200:1dasd(fba): 0.0.0200: 9336/10(CU:6310/80) 64MB
at(512
B/blk)
dasda:CMS1/ LXSWAP(MDSK): dasda1
0.0.0201:1dasd(fba): 0.0.0201: 9336/10(CU:6310/80) 128MB at(512 B/blk)
dasdb:CMS1/ LXSWAP(MDSK): dasdb1
0.0.0202:0dasd(eckd): 0.0.0202: 3390/0A(CU:3990/01) Cyl:3339 Head:15
Sec:224
But IIRC when I did this on SLES 9, it puked on the DIAG disks I setup
using SWAPGEN.
Mark D Pace
Senior Systems Engineer
Mainline Information Systems
1700 Summit Lake Drive
Tallahassee, FL. 32317
Office: 850.219.5184
Fax: 888.221.9862
http://www.mainline.com
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
