I strongly recommend that you get a different Linux/390 distribution.
The Marist distribution is very very much out of date. You'd be much
better off with any of:
Debian/390
Slack/390
CentOS
The way I understand it, you cannot share the same OSA device numbers
across LPARs, but I've never worked in that environment, so I'm not 100%
sure.
Mark Post
-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
inci yeker selkan
Sent: Wednesday, August 23, 2006 10:43 AM
To: [email protected]
Subject: linux/390 ipl from tape, error in network connection eth0
Hi,
I ipled linux for s/390 from tape (downloaded from marist) , but I have
problem with the network connection.
We use osa card, device address 1000 is shared between 2 os/390 lpar.
We now add the linux390 partition as the third lpar.
I gave noauto=1 devno_portno_pairs=0x1000,1 for lcs parameters. 1000
is already being used for read, 1001 is used for write for all lpars.
(Does linux390 need dedicated device numbers???)
It says:
Bringing up interface eth0
insmod: /lib/modules/2.2.16/net/lcs.0:
init_module: Device or resource busy
delaying eth0 initialization.
Could anybody help?
Thanks
inci
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
