Hi, You can configure the NFS server under zOS, then you can install this RPM on your linux guest (http://www.sinenomine.net/vm/mvslogin) and you should be able to connect... We have several linux servers setup this way and it works very good...
Regards, Jose -----Original Message----- From: Lee Stewart [mailto:[EMAIL PROTECTED] Sent: Wednesday, October 04, 2006 3:49 PM To: [email protected] Subject: Reading a z/OS flat file from Linux? Hi all... From Linux on z, can I read a z/OS flat file (DSORG=PS) on a pack where I have read access to that DASD volume? What about multiple extents across multiple volumes? (It's a 50gig file.) Thanks, Lee -- Lee Stewart, Senior SE Sirius Enterprise Systems Group Phone: (303) 798-2954 Fax: (720) 228-2321 [EMAIL PROTECTED] www.siriuscom.com ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 [Scanned by McAfee] ----------------------------------------- Scanned by Triple-S *************************Attention************************* This electronic message, including any attachments, contains information that may be legally confidential and/or privileged. The information is intended solely for the individual or entity named above and access by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution, or use of the contents of this information is prohibited and may be unlawful. If you have received this electronic transmission in error, please reply immediately to the sender that you have received the message in error and delete it from your system. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
