Line 71 is the DEFAULTNET line
Avinoam
ציטוט Alan Altmark:
On Monday, 10/09/2006 at 09:26 ZE2, Avinoam Hirschberg
<[EMAIL PROTECTED]> wrote:
Hi,
I'm getting this error during the startup of my tcp/ip.
line 71 is the DEFAULTNET line, as far as i can see 10.0.0.1 is IPv4
address.
I'm using z/VM 5.1
any idea what the error here ?
DTCPRS007E Error encountered in reading PROFILE TCPIP
*:
DTCPRS280E Line 71: The gateway specified on the first_hop operand of
the GATEWAY entry is not an IPv4 address
GATEWAY
; Network First Link MTU Subnet Subnet
; Address Hop Name Size Mask Value
; ----------- ----------- ----------- ----- -------- ---------
192.168.201 = ETH0 8192 0
10.0.0 = LCS0 1492 0.0.255.0
; 10.0.0 10.0.0.1 LCS0 1492 0.0.255.0
DEFAULTNET 10.0.0.1 LCS0 1492 0
; (End GATEWAY Static Routing information)
; ----------------------------------------------------------------------
You didn't tell us which line was line 71, so I'll speculate that the
problem is being caused by the missing subnet value on the 10.0.0 line. It
should read:
10.0.0.0 = LCS0 1492 0.0.255.0 0.0.0.0
I think the parser picked up DEFAULTNET as the subnet value on the 10.0.0
line (then probably threw it away as invalid), leaving LCS0 as the
first-hop field on the next line.
Alan Altmark
z/VM Development
IBM Endicott
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
