Which doesn't stop Linux from building such a table. My Slack/390 systems that are hosted by OSDL at Marist College all use HiperSocket interfaces on the Guest LAN, and qetharp works just fine for me: # qetharp -n -q hsi0 Address HWaddress HWType Iface 148.100.x.x 02:00:0f:00:00:08 ether hsi0 148.100.x.x 02:00:0f:00:00:09 ether hsi0 148.100.x.x 02:00:0f:00:00:0a ether hsi0 148.100.x.x 02:00:0f:00:20:00 ether hsi0 -snip-
Mark Post -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] Behalf Of Alan Altmark Sent: Friday, January 12, 2007 6:22 PM To: [email protected] Subject: Re: Dump Hipersockets ARP table? On Friday, 01/12/2007 at 10:58 EST, David Kreuter <[EMAIL PROTECTED]> wrote: > I don't think there is an ARP table. Hipersockets are internally handled. You're right, David. Hipersockets are addressed directly by IP address, so ARPs aren't required. A broadcast is simply delivered to all adapters since the h/w knows who is connected! Alan Altmark z/VM Development IBM Endicott ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
