>Hi to all. >I am currently trying to install SLES10 but have run into a problem with the >network setup as follows:
>1 for OSA-2 OSA Express >1 for QDIO >1 for Ethernet >I then get a list of all my devices >I enter the Read channel, Write Channel, Data Channel and Portname >I then enter 1 to enable OSI layer 2 support and after entering this I get >the following message >qeth: Device 0.0.a100/0.0.a101/0.0.a102 is a OSD Express card (level:0845) >with link type OSD_1000 (portname:OSAA100) >qeth:Error in registering MAC address on device 0.0.a100:x200a >Any ideas. >SLES8 worked fine on the same OSA card >Leon Buitendag What type of processor are you running on? Layer 2 OSA support is only supported on a z890/z990/z9 processors. Regards, John ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
