Hey cool. It worked. Thanks Mark. I replaced the other 1: line with this line below.
But it doesn't have the little line in the console that makes us feel all warm and fuzzy that the service finished booting correctly: That is "Welcome to SUSE LINUX Enterprise Server 9 (s390x) - Kernel 2.6.5-7.283-s390x" Any idea how I can keep that there? Marcy Cortes This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation." -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Mark Post Sent: Monday, April 02, 2007 21:45 To: LINUX-390@VM.MARIST.EDU Subject: Re: [LINUX-390] Philosophy: connecting to a Linux server >>> On Mon, Apr 2, 2007 at 11:55 PM, in message <[EMAIL PROTECTED]>, Marcy Cortes <[EMAIL PROTECTED]> wrote: > Rick wrote: > "If you have an automatic login of root on the console, that should > provide enough escape for when all other things fail." > > How are you setting that up? I've looked and it wasn't obvious to me. This entry in /etc/inittab is how I do it in Slack/390: 1:12345:respawn:/bin/bash -i Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
