<snip> > Enter the bus ID and the device number of your CCW devices. > CTC/ESCON and LCS need two subchannels: > (e.g. "0.0.0600,0.0.0601" will configure the CTC or ESCON interface > with the subchannels 0x600 and 0x601) > QETH needs three subchannels p.e. 0.0.0300,0.0.0301,0.0.0302 > > --> 0.0.0e38,0.0.0e39,0.0.0e3a > > Portname of the OSA-Express feature in QDIO mode and z/VM Guest LAN > This parameter is optional with z/VM 4.4.0 or z/VM 4.3.0 with > APARs VM63308 and PQ73878 > Press enter if you don't want to enter a portname > > --> CHIP00 > > [snip] > > > Also, it's a shot in the dark, but are you sure that device 0e3a is > accessible and connected? In our z9, only the first 10 (virtual) > devices of each OSA chpid are usable in each LPAR (i.e. 0e30 - 0e39). > Can you attempt with a different triplet? > > -Brad >
I've tried what you wrote above with the same results. As far as the addresses, I'm not positive, but that's what I was told. Presumably there's some way, using the HMC to verify the addrs for LP7, but I don't know how, so if you could give me some pointers, that would be great. Thanks, Kelly ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
