For long-term compatibility, you'll want to create route files for each interface. For hsi0, create /etc/sysconfig/network-scripts/route-hsi0. For the syntax of this file, see:
http://kbase.redhat.com/faq/FAQ_79_2561.shtm (note: the syntax hasn't changed since RHEL 3) During network startup, these files are sourced for valid routes and they're added automatically. -Brad On Fri, 2007-05-25 at 15:49 +0200, Rob van der Heij wrote: > On 5/25/07, Fuhrmann Anna <[EMAIL PROTECTED]> wrote: > > > as there is no default file static-routes, I am not so happy by > > creating one, even more so as I found this piece of documentation: > > > > "With the introduction of Redhat version 8 and continued into version 9, > > the /etc/sysconfig/static-routes file no longer seems to function > > correctly." > > Two different beasts, from what I can tell. The ifup-routes appears to > be part of activating an interface, where the static routes are for > all interfaces. But I am looking at a slightly different level so > things may have changed. Redhat 9 is a bit old hat (no 00D intended). > > My /etc/init.d/network has a snippet that says: > # Add non interface-specific static-routes. > if [ -f /etc/sysconfig/static-routes ]; then > grep "^any" /etc/sysconfig/static-routes | while read > ignore args ; do > /sbin/route add -$args > done > fi > > [EMAIL PROTECTED] init.d]# cat /etc/sysconfig/static-routes > any net 10.0.0.0 netmask 255.255.255.0 gw 192.168.0.220 > > [EMAIL PROTECTED] init.d]# route -n > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use Iface > 10.0.0.0 192.168.0.220 255.255.255.0 UG 0 0 0 eth0 > 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 > 192.168.206.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0 > 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 > 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 > > Rob > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
