Eric and Barbara Sammons wrote:
Looking into performance problems, in search of some ideas of what to
look for. I believe the issue may be related to the type of DASD
being used.
Scenario, dd command to generate a 1G file if=/dev/zero takes 15s on
x86_64 platform. The same command takes 15m on the s390x platform.
In my environment the command takes 16s. My environment leverages
MOD-3 DASD while the environment in question has MOD-9 and MOD-27
devices. I know historically the MOD-9 is typically a slower device
but I don't know much about the MOD-27.
Is it truly possible that the performance of these devices is bad
enough to see such a difference between MOD-3 and x86_64 v. MOD-9 and
MOD-27? What else should / can I look at to determine the root cause
of the performance issues?
Hi Eric,
just for fun on our SLES10 s390x using 3390-9 (Shark) on a z/900 under
z/VM 5.2 without any tuning at all:
ihlscov2:~ # time dd bs=1024 count=1048576 if=/dev/zero of=/test1
1048576+0 records in
1048576+0 records out
1073741824 bytes (1.1 GB) copied, 72.3474 seconds, 14.8 MB/s
real 1m12.357s
user 0m0.944s
sys 0m23.172s
ihlscov2:~ #
Mark
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
