Are those 2 CHPIDS on the same card? If so, you can't be layer 2 and layer 3 on the same card.
Marcy Cortes "This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation." -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Bhemidhi, Ashwin Sent: Wednesday, June 20, 2007 10:04 AM To: [email protected] Subject: [LINUX-390] How to add Layer2 network device to linux guest machine We have few Z/VM Linux guest that we are evaluating for consideration. We have both Redhat (evaluation) and Debian guest machines installed, named svml09 and svml02 respectively. We need to 2 network interface devices in the Linux guest machines for our home grown Linux application to work. One the device talk IP and the other LLC over Ethernet. When we installed both the Linux guest we only had 1 OSA CHPID( ID 2F, 600, 601,602) allocated and available for the guest z/VM machines and during the Linux guest installation the network device were detected and configured as a part of the installation wizard in both the distributions. Here is the trouble we are facing. We recently got another OSA CHIPID 2C (0700, 0701, 0702) made available to the VM and configured it as a layer 2 device and made them available to. Now we are trying get the new network interfaces added and configured on both the Linux guest but are unable. For the Redhat guest svml09 we followed the direction specified at http://www.redhat.com/docs/manuals/enterprise/RHEL-4-Manual/s390-multi-i nstall-guide/s1-s390info-addnetdevice.html . When i try to bring the network device online using the command "echo 1 echo 1 /sys/bus/ccwgroup/drivers/qeth/0.0.0700/online" and check if the devices goes online the result of "cat /sys/bus/ccwgroup/drivers/qeth/0.0.0700/online" we get a result "0" inidicating the device being offline. Can anyone please point out what we are doing wrong and are how to trouble shoot this issue. Thank you, Ashwin ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
smime.p7s
Description: S/MIME cryptographic signature
