1.DEF VSWITCH .. CONTROLLER <urname1> ...
2. SET VWSWITCH CONTROLLER <urname2>

David


-----Original Message-----
From: Linux on 390 Port on behalf of Marcy Cortes
Sent: Tue 9/4/2007 3:59 PM
To: [email protected]
Subject: Re: VSWITCH controllers
 
Well, your mileage may vary... But I'd be wary about putting test and prod
on the same lpar/VM system.  Our test linux servers are not well behaved at
all - it's the wild west on that lpar:)  I wouldn't want to explain to
management why dev/test stuff may have implacted production.  Will cost you
some in memory, but is probably worth it.

Marcy Cortes

"This message may contain confidential and/or privileged information. If you
are not the addressee or authorized to receive this for the addressee, you
must not use, copy, disclose, or take any action based on this message or
any information herein. If you have received this message in error, please
advise the sender immediately by reply e-mail and delete this message. Thank
you for your cooperation."


-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Peter
Rothman
Sent: Tuesday, September 04, 2007 12:48 PM
To: [email protected]
Subject: [LINUX-390] VSWITCH controllers

We have test and production Linux systems on one of our z/VM 520 systems.
We want to separate the test and production systems  - different VSWITCHes,
subnets etc.

However it seems there is no way to separate the controllers - that is if
you want more than one by specifying CONTROLLER *VSWITCH.

CP allocates any controllers that are available.

Is separating controllers doable?

Peter.

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions, send email
to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390


----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390


----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

Reply via email to