We have 80 machines...vmlinux1 is what I use for testing, so it's not an issue
Patrick Carroll | Enterprise Architect L.L.Bean, Inc.(r) | Double L St. | Freeport ME 04033 http://www.llbean.com | [EMAIL PROTECTED] | 207.552.2426 -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Tom Duerbusch Sent: Wednesday, November 21, 2007 11:42 AM To: [email protected] Subject: Missing DIAG discipline; was RE: For me, it didn't work with anything under SLES10. With SLES10, the diag driver now works with 64 bit systems. BTW, you need to change your guest machines names....VMLINUX1. Having only a single character changing doesn't allow for sufficient Linux guest machines that you will end up having <G>. Tom Duerbusch THD Consulting Law of Cat Stretching A cat will stretch to a distance proportional to the length of the nap just taken. >>> Pat Carroll <[EMAIL PROTECTED]> 11/21/2007 6:37 AM >>> Hi Mark I'm trying to force the use of the diag driver for vdisk swap devices. In particular, I want to set up device 801 as the default swap device for all servers, and have the ability to add additional swap devices at 900-90f, as required. Results are documented below. In my search I found hints that there may be an issue with diag250 in 64 bit mode with > 2GB of memory, hence the question. Here's a snippet of the boot messages: Nov 20 13:25:18 vmlinux1 kernel: We are running under VM (64 bit mode) Nov 20 13:25:18 vmlinux1 kernel: Built 1 zonelists Nov 20 13:25:18 vmlinux1 kernel: Kernel command line: dasd=800,801(diag),802-83f,900-90f(diag) possible_cpus=2 root=LABEL=/ BOOT_IMAGE=0 <snip> Nov 20 13:25:19 vmlinux1 kernel: dasd(eckd): 0.0.0800: 3390/0C(CU:3990/01) Cyl:10016 Head:15 Sec:224 Nov 20 13:25:19 vmlinux1 kernel: Using cfq io scheduler Nov 20 13:25:19 vmlinux1 netfs: Mounting other filesystems: succeeded Nov 20 13:25:19 vmlinux1 kernel: dasd(eckd): 0.0.0800: (4kB blks): 7211520kB at 48kB/trk compatible disk layout Nov 20 13:25:19 vmlinux1 kernel: dasda:VOL1/ 0X0800: dasda1 dasda2 Nov 20 13:25:19 vmlinux1 kernel: dasd_generic couldn't online device 0.0.0801 - discipline DIAG not available Nov 20 13:25:19 vmlinux1 kernel: dasd_generic_probe: could not initially online cw-device 0.0.0801 <snip> Nov 20 13:25:19 vmlinux1 kernel: dasd_generic couldn't online device 0.0.0900 - discipline DIAG not available Nov 20 13:25:19 vmlinux1 kernel: dasd_generic_probe: could not initially online ccw-device 0.0.0900 After boot is complete, here's some status: bash-3.00# cat /sys/bus/ccw/devices/0.0.0801/online 0 bash-3.00# cat /sys/bus/ccw/devices/0.0.0900/online 0 bash-3.00# cat /sys/bus/ccw/devices/0.0.0801/use_diag 1 bash-3.00# cat /sys/bus/ccw/devices/0.0.0900/use_diag 1 Echoing a "1" to online does not change the status of etiher device. >From vmlinux1's PROFILE EXEC: /* Set up swap on vdisk */ 'EXEC SWAPGEN 801 819200 (DIAG' 'EXEC SWAPGEN 900 819200 (DIAG' Here's what CP says (after boot is complete): #CP Q V DASD <snip> DASD 0800 3390 VM6472 R/W 10016 CYL ON DASD 6472 SUBCHANNEL = 0007 DASD 0801 9336 (VDSK) R/W 819200 BLK ON DASD VDSK SUBCHANNEL = 0011 DASD 0900 9336 (VDSK) R/W 819200 BLK ON DASD VDSK SUBCHANNEL = 0012 Modprobe.conf and zipl.conf look correct (see the third boot message, above). The initrd image has dasd_diag_mod in it (I decomposed and verified). I'm running out of ideas...?? Thanks for your response. Cheers....Pat Patrick Carroll | Enterprise Architect L.L.Bean, Inc.(r) | Double L St. | Freeport ME 04033 http://www.llbean.com | [EMAIL PROTECTED] | 207.552.2426 -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Mark Post Sent: Tuesday, November 20, 2007 6:21 PM To: [email protected] Subject: >>> On Tue, Nov 20, 2007 at 5:39 PM, in message <[EMAIL PROTECTED]>, Pat Carroll <[EMAIL PROTECTED]> wrote: > Can someone please clear up some confusion... > Does the dasd diag driver (dasd_diag_mod) work in a 64 bit Red Hat > Linux server configured with > 2GB memory? > > RH4 U4 (2.6.9-55.0.2.EL) and z/VM 5.2 RSU 0602 (64 bit). It should. What problem(s) are you having with it? Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
