I say "No" to Enable OSI Layer 2 support and then it should ask you for the IP address information.
HTH, Michael Friesenegger Linux/Open Source Technical Specialist email: [EMAIL PROTECTED] cell: 303-249-0817 Novell Making IT Work As One* www.novell.com >>> On Thu, May 29, 2008 at 6:15 AM, in message <[EMAIL PROTECTED]>, John Cousins <[EMAIL PROTECTED]> wrote: > ** PRIVATE ** > > Hi Guys > In the absence of local Novell support, as they are both on leave, wondered > if anyone else had any experience of the SuSe 10 starter system. > We have got as far as "Install a New Guest using the Starter System" on Page > 28 of the Starter System Installation Guide and created the new virtual > machine using the notes in "CP Directory Entry Notes". > Then following "Starting the Install Process" on Page 30, these are the > steps: > > enter - SLES > > Select - 4) Start Installation or System > > Select - 1) Start Installation or Update > > select - 2) Network > > select - 1) FTP > > select - 1) OSA-2 or OSA Express > > select - 1) QDIO > > select - 1) Ethernet > > get the following - > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > IPv6 over IPv4 tunneling driver > qdio: loading QDIO base support version 2 > qeth: loading qeth S/390 OSA-Express driver > > 0.0.0340 1731/01 > 0.0.0341 1731/01 > 0.0.0342 1731/01 > > Device address for read channel> > enter - 0.0.0340 > Device address for write channel> > enter - 0.0.0341 > Device address for data channel> > enter - 0.0.0342 > > Portname to use> > > enter > > Enable OSI Layer 2 support? > > 1) Yes > > MAC address> > enter - 02-00-01-00-00-08 ( we sued the MAC address of NOVSTART virt m/c > i.e. > starter system server) > > get the following error message: > qeth: received an IDX TERMINATE with cause code 0xf6 > qeth: sense data available on channel 0.0.0340. > qeth: cstat 0x0 > dstat 0xE > qeth: irb: 00 c2 60 17 1e b8 d0 38 0e 00 10 00 00 80 00 00 > qeth: irb: 01 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > qeth: sense data: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > qeth: sense data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > qeth: Initialization in hardsetup failed! rc=-5 > > > there is no mention of MAC address being requested in the install > instructions, can anyone help? > > Best regards > John Cousins > > John Cousins > Senior IT Officer > Central Support Services ICT Division > Bristol City Council > Romney House > Romney Avenue > PO Box 1380 > Bristol BS99 3HB > > Tel : 0117 922 4705 > Fax: 0117 922 3983 > e-mail: [EMAIL PROTECTED] > > ______________________________________________________________________ > 'Do it online' with our growing range of online services - > http://www.bristol.gov.uk/services > > Sign-up for our email bulletin giving news, have-your-say and event > information > at: http://www.bristol.gov.uk/newsdirect > > View webcasts of Council meetings at http://www.bristol.gov.uk/webcast > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
