Hi, Can someone help me out .
I am trying to install Sles10. IPL from cd and i am in the process of configuring the network. I have an OSA Express 1000baseT card configured as OSE. This card is shared with z/OS lpars. I have configured the OSA using OSA/SF and the two z/os lpar is successfully sharing the OSA. I want to use that same OSA for the SLES10 linux (native mode). During network configuration: Network device i choose 1) OSA2 or OSA Express CCW bus interface i choose 2) LCS Physical Medium i choose ETHERNET Then i input the READ and WRITE channel 0.0.1f70 and 0.0.1f71 Relative Port number I tried 0,1 after i enter the relative port number , i get the following error messages LCS: check on dev 0.0.1f70 dstat=0x0 cstat=0x4 LCS: check on dev 0.0.1f71 dstat=0x0 cstat=0x4 LCS: check on dev 0.0.1f70 dstat=0x2 cstat=0x0 LCS: check on dev 0.0.1f70 dstat=0x2 cstat=0x0 LCS Detection of LCS card failed with RC -5 (0xfffffffb) I have a few questions: 1) What is the 'Relative Port Number" ? My card has to chpids, 1 chpid/port, so this should be 0 ? right ? 2) What is error message telling me ? 3) Do we need to use different addresses for the linux lpar, currently all the z/os lpars and linux lpar use the 1f70-1f71 addresses. Appreciate some guidance. thanks in advance. Caleb ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
