In addtion to what others have said, hopefully you are not using the by-id in /etc/fstab and in zipl.conf.
Marcy "This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation." -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Lee Stewart Sent: Wednesday, November 19, 2008 4:24 PM To: [email protected] Subject: [LINUX-390] LPAR (no VM) DASD migration Hi all, We are migrating Linux CKD DASD to a new DS8100. We have two bare-metal (LPAR) linux server's running. (no z/VM). One is SLES8 and one is SLES10. For the SLES8, I plan to: 1. vi /etc/zipl.conf and change the DASD= to the new devices 2. zipl 3. mkinitrd 4. shutdown 5. migrate dasd 6. startup sles8 server (Does that look OK?) But for the SLES10 system, we are not using DASD= in zipl.conf How do I make the device numbering changes for SLES10 ? (I know that I can still use zipl.conf dasd= and I think it will use that...but not sure if that's the recommended way)... Thanks, -- Lee Stewart, Senior SE Sirius Computer Solutions Phone: (303) 798-2954 Fax: (720) 228-2321 Email: [EMAIL PROTECTED] Web: www.siriuscom.com ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
