>>> On 1/27/2009 at 4:54 PM, "Jones, Russell" <[email protected]> wrote: > I do mean root file system. Here is my zipl.conf. I don't see any device > address in this file. -snip- > [SLES_10_SP1] > image = /boot/image-2.6.16.54-0.2.10-default > target = /boot/zipl > ramdisk = /boot/initrd-2.6.16.54-0.2.10-default,0x1000000 > parameters = > "root=/dev/disk/by-id/ccw-STK.02000000008176.0022.2a-part1 TERM=dumb"
So, add some. parameters = "root=/dev/disk/by-id/ccw-STK.02000000008176.0022.2a-part1 dasd=322b,322f TERM=dumb" Then see if mkinitrd's behavior changes. Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
