My zipl.conf now looks like this:
*********
ANPLNX02:/etc# cat zipl.conf
# Modified by YaST2. Last modification on Tue Nov 25 11:10:32 CST 2008
[defaultboot]
defaultmenu = menu
###Don't change this comment - YaST2 identifier: Original name: linux###
[SLES_10_SP1]
image = /boot/image-2.6.16.54-0.2.10-default
target = /boot/zipl
ramdisk = /boot/initrd-2.6.16.54-0.2.10-default,0x1000000
parameters = "root=/dev/disk/by-path/ccw-0.0.322b-part1
dasd=322b,322f TERM=dumb"
:menu
default = 1
prompt = 1
target = /boot/zipl
timeout = 10
1 = SLES_10_SP1
2 = ipl
###Don't change this comment - YaST2 identifier: Original name: ipl###
[ipl]
image = /boot/image
target = /boot/zipl
ramdisk = /boot/initrd,0x1000000
parameters = "root=/dev/disk/by-path/ccw-0.0.322b-part1
dasd=322b,322f TERM=dumb"
**********************
And my myinitrd output looks like this:
**********************
ANPLNX02:/etc# mkinitrd
Root device: /dev/disk/by-path/ccw-0.0.322b-part1 (mounted on / as
ext3)
Module list: jbd ext3 dasd_eckd_mod (xennet xenblk)
Kernel image: /boot/image-2.6.16.54-0.2.10-default
Initrd image: /boot/initrd-2.6.16.54-0.2.10-default
Shared libs: lib64/ld-2.4.so lib64/libacl.so.1.1.0
lib64/libattr.so.1.1.0 lib64/libblkid.so.1.0 li
b64/libc-2.4.so lib64/libcom_err.so.2.1 lib64/libdl-2.4.so
lib64/libext2fs.so.2.4 lib64/libhistory.so
.5.1 lib64/libncurses.so.5.5 lib64/libpthread-2.4.so
lib64/libreadline.so.5.1 lib64/librt-2.4.so lib6
4/libuuid.so.1.2 lib64/libnss_files-2.4.so lib64/libnss_files.so.2
lib64/libgcc_s.so.1
Driver modules: dasd_mod dasd_eckd_mod
DASDs: 0.0.322a(ECKD) 0.0.322e(ECKD) 0.0.322b(ECKD)
Filesystem modules: jbd ext3
Including: initramfs fsck.ext3
16371 blocks
initrd updated, zipl needs to update the IPL record before IPL!
************************
I changed my dasd fstab setting to use device path, ipl'ed my base
system, shut it down, copied the volume using mvs dss copy, ipl'ed the
base system and mounted the cloned file system on the base system. I
then did a chroot to the new file system.
The mkinitrd command looks good except for the "DASDs" section. It is
getting those addresses from what I have mounted on the base system and
I want it to use 322b and 322f.
Russell Jones
ANPAC
System Programmer
[email protected]
-----Original Message-----
From: Linux on 390 Port [mailto:[email protected]] On Behalf Of
Mark Post
Sent: Wednesday, January 28, 2009 10:12 AM
To: [email protected]
Subject: Re: Clone SUSE 10
>>> On 1/28/2009 at 9:58 AM, "Jones, Russell" <[email protected]>
wrote:
> Should the parameters in /etc/zipl.conf look like:
>
> root=/dev/dasda1 ro noinitrd
No. If you do, your system won't boot. Just add 'dasd=addr1,addr2" to
what is there now.
Mark Post
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
