>
> > What kind of hardware and operating system are you running this on?
>
A Ubuntu 8.10 installation. P4 Intel chip, 1GB RAM.
I still end up at disabled wait state with 3.04.1 (though with the older
release of hercules it reports instcount of 18 rather than 2). I'll have to
try this on some other boxes.
herc 3.04.1 SLES11 IPL from suse.ins:
HHCCP007I CPU0000 architecture mode set to
ESA/390
HHCCP011I CPU0000: Disabled wait
state
PSW=000A0000
00000000
Command
==>
CPU0000 PSW=000A0000 00000000 M.W.....
instcount=18
herc 3.04.1 SLES10SP2 IPL from suse.ins:
IPLs, but ultimately blows up with an instruction count of about 1.7 million
(before installer asks for anything)
herc 3.04.1 Debian Lenny IPL from reader:
IPLs, installer runs but is unable to "activate" dasd
herc 3.06 SLES11 IPL from suse.ins:
HHCCP007I CPU0000 architecture mode set to
ESA/390
HHCCP011I CPU0000: Disabled wait
state
PSW=000A0000
00000000
Command
==>
CPU0000 PSW=000A000000000000 24M.W.....
instcount=2
herc 3.06 SLES10SP2 IPL from suse.ins:
IPLs, full installation complete without apparent problem
herc 3.06 Debian Lenny IPL from reader:
IPLs, full installation complete without apparent problem
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
