Right, which is why I prefer to install the base Linux image onto more
"conventional" disk, like 3390 DASD. Once the Linux kernel successfully
boots, it can then begin to exploit the more unconventional (at least in
a S/390 sense) disks like FCP.
Andrew Galewsky wrote:
The interesting thing of course is that the yast installation intimates that
it is ok to put everything but /boot on the remote disk. The problem comes
is I think that since /etc/init.d and the other stuff isnt mounted so you
cant really get the system up enough to move things around!
On 7/24/09 2:31 PM, "Dave Jones" <[email protected]> wrote:
Yes, it does, Andy. Can you move the iSCSI startup to someplace later in
the boot process, after the network has come up?
Andy Galewsky wrote:
It appears that iSCSI is trying to start before the Ethernet is actually
up....
Cannot find device "eth0"
SIOCGIFFLAGS: No such device
RTNETLINK answers: Network is unreachable
Starting iSCSI daemon
Login session 10.37.1.72:3260 iqn.2006-01.com.openfiler:tsn.3386c86c41ee
iscsiadm: Could not login session (err 4).
-----Original Message-----
From: Linux on 390 Port [mailto:[email protected]] On Behalf Of
Dave Jones
Sent: Thursday, July 23, 2009 7:59 PM
To: [email protected]
Subject: Re: ISCSI, SUSE and Installation
Hi, Andy.
What error, exactly, does the initiator report at boot time? What's on
the Linux console?
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
Dave Jones
V/Soft
www.vsoft-software.com
Houston, TX
281.578.7544
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
Dave Jones
V/Soft
www.vsoft-software.com
Houston, TX
281.578.7544
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
