Hi Mark, Do you have an idea in what cases this wouldn't work? This method in combination with the default dasd udev rules seems to be working for me in SLES11.
Samir Reddahi Mark Post <[email protected]> Sent by: Linux on 390 Port <[email protected]> 08/01/2010 19:09 Please respond to Linux on 390 Port <[email protected]> To [email protected] cc Subject Re: sles11 - adding dasd & yast problem >>> On 1/8/2010 at 07:52 AM, Samir Reddahi <[email protected]> wrote: -snip- > You can also add an "options dasd_mod dasd=" line to the > /etc/modprobe.conf.local with all the dasd devices you want to get online > after IPL. After that you run mkinitrd en zipl. > > for example: > options dasd_mod dasd=200-202,203(diag),204-207,300-31F That won't necessarily bring them _online_ in SLES11. That's controlled by udev rules, which is why Novell recommends using YaST, or the dasd_configure script to set up your disks. Both of those will handle all the necessary pieces. Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 - Confidentiality Notice - This communication and the information it contains is intended (a) for the person(s) or organization(s) named above and for no other person or organization, and (b) may be confidential, legally privileged and protected by law. Unauthorized use, copying or disclosure of any of it may be unlawful! If you receive this communication in error, please notify us immediately, destroy any copies and delete it from your computer system. Please consult our disclaimer on our site www.securex.eu Thank you. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
