I believe that for SLES 11 zipl.conf is no longer used to determine which dasd to online at boot. Instead, however, you can run `dasd_configure 0.0.0210 1` before you run mkinitrd and zipl, and the specified disk should be set online and come back online on subsequent boots.
On Mon, Mar 29, 2010 at 8:50 AM, Agblad Tore <[email protected]> wrote: > I can't say I remember it, but I usually do due to prev. mistakes.... > However, after making disk online and mounting everything, I have run > mkinitrd and zipl. > Also compared the result with the clone base machine, and it looks the > same. > It seams SLES11 does not save all disks in zipl config, just the boot > device... hmmm > > I'm suspicious here, but don't know what to look for... > > > Cordialement / Vriendelijke Groeten / Best Regards / Med Vänliga Hälsningar > Tore Agblad > > Volvo Information Technology > Infrastructure Mainframe Design & Development > SE-405 08, Gothenburg Sweden > E-mail: [email protected] > > http://www.volvo.com/volvoit/global/en-gb/ > ________________________________________ > From: Linux on 390 Port [[email protected]] On Behalf Of Bernie Wu [ > [email protected]] > Sent: Monday, March 29, 2010 14:36 > To: [email protected] > Subject: Re: SLES11 one disk is not online at boot, mount fails (of course) > > Hi Tore, > > > chccwdev -e 210 > > mount -a > > Did you run mkinitrd & zipl after bringing the disk online and mounting it > ? > > > The information contained in this e-mail message is intended only for the > personal and confidential use of the recipient(s) named above. This message > may be an attorney-client communication and/or work product and as such is > privileged and confidential. If the reader of this message is not the > intended recipient or an agent responsible for delivering it to the intended > recipient, you are hereby notified that you have received this document in > error and that any review, dissemination, distribution, or copying of this > message is strictly prohibited. If you have received this communication in > error, please notify us immediately by e-mail, and delete the original > message. > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
