I hadn't put two-and-two together after I noticed that wireshark came
out of ethereal, but it doesn't seem to solve my problem anyhow. I
pulled down the ethereal package on a separate zlinux guest (so I didn't
have to worry about interference with whatever I'd screwed up on the
wireshark install/deinstall) and started it up, only to find it seems to
have the same limitation. This leads me to believe I just can't use the
filter on ip address (net/mask) when running a trace of the eth0
interface, or maybe that it expects the filter in a different format.
Do you happen to know how to translate the capture-filter (from gui,
because if I can't figure it out there, it's even more unlikely I could
use the command interface!):
"net 10.x.y.0 mask 255.255.255.0"
To something that would work with the eth0 interface? That works great
filtering the "any" data, but nets me nothing with eth0...
Shannon Collinson
[email protected]
Tel: 404.827.6070 Mobile: 404.642.1280
Fax: 404.581.1688
-----Original Message-----
From: Linux on 390 Port [mailto:[email protected]] On Behalf Of
Mark Post
Sent: Wednesday, April 07, 2010 6:17 PM
To: [email protected]
Subject: Re: building wireshark on SLES10SP2?
>>> On 4/7/2010 at 06:08 PM, "Collinson.Shannon"
<[email protected]>
wrote:
> Has anyone had any experience building WireShark on SLES10 SP2? I
> noticed that there's actually a Novell-delivered rpm for SLES11, but I
> can't see anything like that for my release of zlinux, so I tried to
> build it myself from source.
The package ethereal on SLES10 is the equivalent of wireshark. It is
available for SLES10 SP2 on System z. But, you don't really need the
GUI that comes with it. You could just use the tcpdump or tcpdump-qeth
command to capture the raw data.
Mark Post
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
LEGAL DISCLAIMER
The information transmitted is intended solely for the individual or entity to
which it is addressed and may contain confidential and/or privileged material.
Any review, retransmission, dissemination or other use of or taking action in
reliance upon this information by persons or entities other than the intended
recipient is prohibited. If you have received this email in error please
contact the sender and delete the material from any computer.
SunTrust is a federally registered service mark of SunTrust Banks, Inc. Live
Solid. Bank Solid. is a service mark of SunTrust Banks, Inc.
[ST:XCL]
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
