I missed that yes :( anyhow, i fit was on a z, you simply have to do it with tcpdump and ftp into a PC, since the desktop you can have for a zLinux always is via network = to slow. It didn't work, I tried, screen just stays blank (mainly)
Cordialement / Vriendelijke Groeten / Best Regards / Med Vänliga Hälsningar Tore Agblad Volvo Information Technology Infrastructure Mainframe Design & Development SE-405 08, Gothenburg Sweden E-mail: [email protected] http://www.volvo.com/volvoit/global/en-gb/ ________________________________________ From: Linux on 390 Port [[email protected]] On Behalf Of Mark Perry [[email protected]] Sent: Saturday, April 24, 2010 05:37 To: [email protected] Subject: Re: building wireshark on SLES10SP2? On 19 April 2010 21:56, Agblad Tore <[email protected]> wrote: > You don't have to use the z cpu cycles for wireshark: > > issue tcpdump into file in the zlinux machine > copy the file to a linux desktop with opensuse for example > run wireshark with that infile > I think you missed the point of the thread..... The whole point was to do dynamic, not post, investigation of traffic. Also the thread focus was on running wireshark on a PC not the mainframe. Mark ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
