That did it Thank you. Had a CONFIG and CONFIG99 and at some point the datamove machine definition got put in both... guess we havent had a need for the datamove machine to get involved until now.
Eric Spencer Neon Enterprise Software LLC. > -----Original Message----- > From: Linux on 390 Port [mailto:[email protected]] On Behalf Of van > Sleeuwen, Berry > Sent: Monday, January 24, 2011 1:37 AM > To: [email protected] > Subject: Re: cannot add new user > > If you are in a hurry and don't have time to setup DATAMOVE, drop the > "LABEL CMS191" in the minidiskstatement. DIRMAINT will still add the user > but doesn't attempt to kick DATAMOVE to format the minidisk. But in that > case you have to format the disk yourself. > > As David already explained, make sure you have a CONFIGxx DATADVH on the > DIRMAINT 11F minidisk. It should contain your tailoring, meaning your > changes against the default CONFIG DATADVH. Our CONFIG0 looks like: > > /* DIRMAINT TAILORED CONFIGURATION > RUNMODE= OPERATIONAL > ONLINE= IMMED > MAXIMUM_UNASSIGNED_WORKUNITS= 50 > DATAMOVE_MACHINE= DATAMOVE * * > DASD_ALLOCATE= EXACT_FF > DISK_SPACE_THRESHHOLD_0192= 85 90 > DISK_SPACE_THRESHHOLD_011F= 85 90 > DISK_SPACE_THRESHHOLD_01DF= 70 90 > DISK_SPACE_THRESHHOLD_01DB= 70 90 > UPDATE_IN_PLACE= YES > EXTENT_CHECK= ON > ONLINE_VIA_DELTA= ON > DEFAULT_USEROPTN= LNK0 LOG1 RCM1 SMS0 NPW0 LNGAMENG > > Make sure your DATAMOVE machine is specified only once, preferably in the > CONFIGxx. I once had enabled DATAMOVE in both CONFIG and CONFIG0 DATADVH. > Aparently DIRMAINT was a bit confused and hit me with the same message. > > Regards, Berry. > > -----Original Message----- > From: Linux on 390 Port [mailto:[email protected]] On Behalf Of > Eric Spencer > Sent: maandag 24 januari 2011 1:08 > To: [email protected] > Subject: cannot add new user > > I am trying to add a new user but it is telling me my DATAMOVE machine is > not set up correctly... I have gone through the DIRMAINT config a couple > of times now and double checked everything, loggen onto DATAMOVE machine > and verified the points in the manual. Is there anywhere else I can look > to see what it doesn't like? > > DVHBIU3428I Changes made to directory entry RHGI71 have been placed > DVHBIU3428I online. > DVHSCU3519E The command you have issued requires DATAMOVE interaction. > DVHSCU3519E The DATAMOVE machines are not defined or incorrectly > DVHSCU3519E defined. > DVHSMA3212E Unexpected RC= 3519, from: EXEC DVHSSCWU AMDISK 0191 XXXX > DVHSMA3212E AUTOG 50 ZVMCMS MR LABEL CMS191 > > Eric Spencer > Neon Enterprise Software > > > > > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, send > email to [email protected] with the message: INFO LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit http://wiki.linuxvm.org/ > > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, send > email to [email protected] with the message: INFO LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit http://wiki.linuxvm.org/ ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
