We are using or have used McData 3232, McData i10k, and Cisco 9513 switches
for zSeries Fiber Channel connectivity to our SAN storage.  We have used
these to communicate with EMC Clariion, DMX3, VMAX, and HDS TagmaStore disk
subsystems.

Currently we are using the Cisco 9513 switches with EMC VMAX for the zLinux
and z/VM disk LUN connectivity.  We use NPIV and have some of the LUNs
defined directly in the zLinux guests as FBA devices and others defined as
EDEVs in z/VM which we then assign to the zLinux guests as minidisks.  For
ease of definition related to disaster recovery scenarios we have decided to
migrate all of our servers over time to using the EDEV minidisks, knowing
that there could be performance implications but our IO rates are low enough
that we are not concerned.

Just to clarify, there is no FICON involved in these connections as they are
all Fiber Channel.  The zSeries channels can be used for native FC or FICON
connections.  If you want to use NPIV, which I highly recommend, then you
need to set the NPIV on for each LPAR where you are using it through the HMC
with the channel offline to all LPARs.

Craig Collins
State of WI, DOA, DET

On Thu, May 12, 2011 at 7:52 AM, Davey, Clair <[email protected]> wrote:

> What model of switches are people using for Ficon to Fiber Channel
> connectivity to your SANS?
>
> The contents of this e-mail are confidential to the ordinary user of the
> e-mail address to which it was addressed and may also be privileged. If you
> are not the addressee of this e-mail you should not copy, forward, disclose
> or otherwise use it or any part of it in any form whatsoever. If you have
> received this e-mail in error, please notify us by telephone or e-mail the
> sender by replying to this message, and then delete this e-mail and other
> copies of it from your computer system. We reserve the right to monitor all
> e-mail communications through our network.
>
> ----------------------------------------------------------------------
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO LINUX-390 or
> visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390
> ----------------------------------------------------------------------
> For more information on Linux on System z, visit
> http://wiki.linuxvm.org/
>

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/

Reply via email to