cpsendx 602 cp q osa
LNXEC602: OSA  1200 ON NIC  1200  UNIT 000 SUBCHANNEL = 0000
LNXEC602:      1200 DEVTYPE OSA         CHPID 02 OSD
LNXEC602:      1200 MAC 02-00-00-00-00-79 CURRENT
LNXEC602:      1200 QDIO-ELIGIBLE       QIOASSIST-ELIGIBLE
LNXEC602: OSA  1201 ON NIC  1200  UNIT 001 SUBCHANNEL = 0001
LNXEC602:      1201 DEVTYPE OSA         CHPID 02 OSD
LNXEC602:      1201 QDIO-ELIGIBLE       QIOASSIST-ELIGIBLE
LNXEC602: OSA  1202 ON NIC  1200  UNIT 002 SUBCHANNEL = 0002
LNXEC602:      1202 DEVTYPE OSA         CHPID 02 OSD
LNXEC602:      1202 QDIO-ELIGIBLE       QIOASSIST-ELIGIBLE

Ready; T=0.01/0.01 12:46:24
 cpsendx 602 cp q nic
LNXEC602: Adapter 1200.P00 Type: QDIO      Name: UNASSIGNED  Devices: 3
LNXEC602:   MAC: 02-00-00-00-00-79         VSWITCH: SYSTEM LNXVSW2

Ready; T=0.01/0.01 12:46:42
 cpsendx 602 cp q vswitch
LNXEC602: VSWITCH SYSTEM LNXVSW2  Type: VSWITCH Connected: 4    Maxconn:
INFINIT
E
LNXEC602:   PERSISTENT  RESTRICTED    ETHERNET Accounting: OFF
LNXEC602:   VLAN Unaware
LNXEC602:   MAC address: 02-00-00-00-00-03
LNXEC602:   State: Ready
LNXEC602:   IPTimeout: 5         QueueStorage: 8
LNXEC602:   Isolation Status: OFF
LNXEC602:   RDEV: 10F6.P00 VDEV: 10F6 Controller: LNXVSW2

Ready; T=0.01/0.01 12:46:56


It's acting like it does when I forget to add the DEDICATE cards for a
real OSA card, that is, Linux thinks the device is just not there.  But CP
seems to think it is.


Chuck Tribolet
[email protected] (IBM business)
[email protected] (Personal)
http://www.almaden.ibm.com/cs/people/triblet



From:   Mark Post <[email protected]>
To:     [email protected]
Date:   06/28/2011 12:10 PM
Subject:        Re: Another Layer 2 question.
Sent by:        Linux on 390 Port <[email protected]>



>>> On 6/28/2011 at 03:00 PM, Chuck Tribolet <[email protected]>
wrote:
> First command runs with no output.
> Second command returns:
>
> LNXEC602: qeth_configure -l 0.0.1200 0.0.1201 0.0.1202 1
> LNXEC602: (Layer2)
> LNXEC602: Could not set device 0.0.1200 online
> LNXEC602: lnxec602:~ #
>
> My virtual OSA address is 1200/1201/1202

Is it actually coupled to a Layer 2 VSWITCH?
vmcp q nic
vmcp q vswitch


Mark Post

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/


----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/

Reply via email to