We are installing a FCP on a zLinux guest. When we bring up the fcp with multipath we get the following error messages SCSI device sdc: drive cache: write through sdc:<5> Vendor: DGC Model: VRAID Rev: 0531 Type: Direct-Access ANSI SCSI revision: 04 sdc1 sd 0:0:0:3: Attached scsi disk sdc SCSI device sdd: 60817408 512-byte hdwr sectors (31139 MB) sdd: Write Protect is off Vendor: DGC Model: VRAID Rev: 0531 Type: Direct-Access ANSI SCSI revision: 04 SCSI device sdd: drive cache: write through SCSI device sdd: 60817408 512-byte hdwr sectors (31139 MB) sdd: Write Protect is off SCSI device sdd: drive cache: write through sdd: sdd1 Starting slpd ..done audit(1315493425.823:3): audit_pid=3897 old=0 by auid=4294967295 Sep 08 10:50:25 | sdbl: emc prio: path not correctly configured for failover Sep 08 10:50:25 | sdbk: emc prio: path not correctly configured for failover Sep 08 10:50:25 | sdbj: emc prio: path not correctly configured for failover Sep 08 10:50:26 | sda: emc prio: path not correctly configured for failover device-mapper: multipath emc: version 0.0.4 loaded device-mapper: multipath emc: long trespass command will be send device-mapper: multipath emc: honor reservation bit will not be set (default) device-mapper: multipath round-robin: version 1.0.0 loaded device-mapper: multipath emc: long trespass command will be send device-mapper: multipath emc: honor reservation bit will not be set (default) device-mapper: multipath emc: emc_pg_init: sending switch-over command device-mapper: multipath emc: long trespass command will be send device-mapper: multipath emc: honor reservation bit will not be set (default) device-mapper: multipath emc: long trespass command will be send device-mapper: multipath emc: honor reservation bit will not be set (default) device-mapper: multipath emc: emc_pg_init: sending switch-over command device-mapper: multipath emc: honor reservation bit will not be set (default) device-mapper: multipath: Failing path 66:128. device-mapper: multipath: Failing path 65:224. device-mapper: multipath: Failing path 65:48. device-mapper: multipath: Failing path 8:112. device-mapper: multipath: Failing path 67:240. device-mapper: multipath: Failing path 67:192. device-mapper: multipath: Failing path 67:16. device-mapper: multipath: Failing path 66:96. device-mapper: multipath: Failing path 67:224. device-mapper: multipath: Failing path 67:176. device-mapper: multipath: Failing path 66:224. device-mapper: multipath: Failing path 66:80. t will not be set (default) Sep 8 10:50:26 l212t kernel: device-mapper: multipath emc: long trespass comman d will be send Sep 8 10:50:26 l212t kernel: device-mapper: multipath emc: honor reservation bi t will not be set (default) Sep 8 10:50:26 l212t kernel: device-mapper: multipath emc: long trespass comman d will be send Sep 8 10:50:26 l212t kernel: device-mapper: multipath emc: honor reservation bi t will not be set (default)
multipath -ll sdt: emc prio: path not correctly configured for failover sdh: emc prio: path not correctly configured for failover sdbl: emc prio: path not correctly configured for failover sdbi: emc prio: path not correctly configured for failover sdax: emc prio: path not correctly configured for failover sdam: emc prio: path not correctly configured for failover 36006016074c02c00ea4f59cc6fd5e011 dm-9 DGC,VRAID [size=1.0G][features=1 queue_if_no_path][hwhandler=1 emc] \_ round-robin 0 [prio=0][enabled] \_ 0:0:1:8 sdao 66:128 [failed][faulty] \_ 1:0:1:8 sdae 65:224 [failed][faulty] \_ 1:0:0:8 sdt 65:48 [failed][faulty] \_ 0:0:0:8 sdh 8:112 [failed][faulty] \_ round-robin 0 [prio=0][enabled] \_ 1:0:3:8 sdbl 67:240 [failed][faulty] \_ 0:0:3:8 sdbi 67:192 [failed][faulty] \_ 0:0:2:8 sdax 67:16 [failed][faulty] \_ 1:0:2:8 sdam 66:96 [failed][faulty] sdbd: emc prio: path not correctly configured for failover sdaz: emc prio: path not correctly configured for failover ls -l /dev/mapper total 0 brw------- 1 root root 253, 12 Sep 8 10:50 36006016074c02c0016b57e1570d5e011 brw------- 1 root root 253, 11 Sep 8 10:50 36006016074c02c00263f5d526fd5e011 brw------- 1 root root 253, 14 Sep 8 10:50 36006016074c02c004a54a8e16fd5e011 brw------- 1 root root 253, 16 Sep 8 10:50 36006016074c02c006e68a0082fd3e011 brw------- 1 root root 253, 15 Sep 8 10:50 36006016074c02c007068a0082fd3e011 brw------- 1 root root 253, 13 Sep 8 10:50 36006016074c02c007468a0082fd3e011 brw------- 1 root root 253, 10 Sep 8 10:50 36006016074c02c0096a342c06fd5e011 brw------- 1 root root 253, 9 Sep 8 10:50 36006016074c02c00ea4f59cc6fd5e011 lrwxrwxrwx 1 root root 16 Sep 8 10:48 control -> ../device-mapper brw------- 1 root root 253, 0 Sep 8 10:49 oracledb-oraclevol lszfcp 0.0.754c host0 0.0.750c host1 l212t:~ # lszfcp -D lszfcp -D 0.0.754c/0x5006016046e05b86/0x0001000000000000 0:0:0:1 0.0.754c/0x5006016046e05b86/0x0002000000000000 0:0:0:2 0.0.754c/0x5006016046e05b86/0x0003000000000000 0:0:0:3 0.0.754c/0x5006016046e05b86/0x0004000000000000 0:0:0:4 0.0.754c/0x5006016046e05b86/0x0005000000000000 0:0:0:5 0.0.754c/0x5006016046e05b86/0x0006000000000000 0:0:0:6 0.0.754c/0x5006016046e05b86/0x0007000000000000 0:0:0:7 0.0.754c/0x5006016046e05b86/0x0008000000000000 0:0:0:8 0.0.754c/0x5006016246e05b86/0x0001000000000000 0:0:1:1 0.0.754c/0x5006016246e05b86/0x0002000000000000 0:0:1:2 0.0.754c/0x5006016246e05b86/0x0003000000000000 0:0:1:3 0.0.754c/0x5006016246e05b86/0x0004000000000000 0:0:1:4 0.0.754c/0x5006016246e05b86/0x0005000000000000 0:0:1:5 0.0.754c/0x5006016246e05b86/0x0006000000000000 0:0:1:6 0.0.754c/0x5006016246e05b86/0x0007000000000000 0:0:1:7 0.0.754c/0x5006016246e05b86/0x0008000000000000 0:0:1:8 0.0.754c/0x5006016846e05b86/0x0001000000000000 0:0:2:1 0.0.754c/0x5006016846e05b86/0x0002000000000000 0:0:2:2 0.0.754c/0x5006016846e05b86/0x0003000000000000 0:0:2:3 0.0.754c/0x5006016846e05b86/0x0004000000000000 0:0:2:4 0.0.754c/0x5006016846e05b86/0x0005000000000000 0:0:2:5 0.0.754c/0x5006016846e05b86/0x0006000000000000 0:0:2:6 0.0.754c/0x5006016846e05b86/0x0007000000000000 0:0:2:7 0.0.754c/0x5006016846e05b86/0x0008000000000000 0:0:2:8 0.0.754c/0x5006016a46e05b86/0x0001000000000000 0:0:3:1 0.0.754c/0x5006016a46e05b86/0x0002000000000000 0:0:3:2 0.0.754c/0x5006016a46e05b86/0x0003000000000000 0:0:3:3 0.0.754c/0x5006016a46e05b86/0x0004000000000000 0:0:3:4 0.0.754c/0x5006016a46e05b86/0x0005000000000000 0:0:3:5 0.0.754c/0x5006016a46e05b86/0x0006000000000000 0:0:3:6 0.0.754c/0x5006016a46e05b86/0x0007000000000000 0:0:3:7 0.0.754c/0x5006016a46e05b86/0x0008000000000000 0:0:3:8 0.0.750c/0x5006016146e05b86/0x0001000000000000 1:0:0:1 0.0.750c/0x5006016146e05b86/0x0002000000000000 1:0:0:2 0.0.750c/0x5006016146e05b86/0x0003000000000000 1:0:0:3 0.0.750c/0x5006016146e05b86/0x0004000000000000 1:0:0:4 0.0.750c/0x5006016146e05b86/0x0005000000000000 1:0:0:5 0.0.750c/0x5006016146e05b86/0x0006000000000000 1:0:0:6 0.0.750c/0x5006016146e05b86/0x0007000000000000 1:0:0:7 0.0.750c/0x5006016146e05b86/0x0008000000000000 1:0:0:8 0.0.750c/0x5006016346e05b86/0x0001000000000000 1:0:1:1 0.0.750c/0x5006016346e05b86/0x0002000000000000 1:0:1:2 0.0.750c/0x5006016346e05b86/0x0003000000000000 1:0:1:3 0.0.750c/0x5006016346e05b86/0x0004000000000000 1:0:1:4 0.0.750c/0x5006016346e05b86/0x0005000000000000 1:0:1:5 0.0.750c/0x5006016346e05b86/0x0006000000000000 1:0:1:6 0.0.750c/0x5006016346e05b86/0x0007000000000000 1:0:1:7 0.0.750c/0x5006016346e05b86/0x0008000000000000 1:0:1:8 0.0.750c/0x5006016946e05b86/0x0001000000000000 1:0:2:1 0.0.750c/0x5006016946e05b86/0x0002000000000000 1:0:2:2 0.0.750c/0x5006016946e05b86/0x0003000000000000 1:0:2:3 0.0.750c/0x5006016946e05b86/0x0004000000000000 1:0:2:4 0.0.750c/0x5006016946e05b86/0x0005000000000000 1:0:2:5 0.0.750c/0x5006016946e05b86/0x0006000000000000 1:0:2:6 0.0.750c/0x5006016946e05b86/0x0007000000000000 1:0:2:7 0.0.750c/0x5006016946e05b86/0x0008000000000000 1:0:2:8 0.0.750c/0x5006016b46e05b86/0x0001000000000000 1:0:3:1 0.0.750c/0x5006016b46e05b86/0x0002000000000000 1:0:3:2 0.0.750c/0x5006016b46e05b86/0x0003000000000000 1:0:3:3 0.0.750c/0x5006016b46e05b86/0x0004000000000000 1:0:3:4 0.0.750c/0x5006016b46e05b86/0x0005000000000000 1:0:3:5 0.0.750c/0x5006016b46e05b86/0x0006000000000000 1:0:3:6 0.0.750c/0x5006016b46e05b86/0x0007000000000000 1:0:3:7 0.0.750c/0x5006016b46e05b86/0x0008000000000000 1:0:3:8 Every time we try to define a LVM at the mapper its cancel. The Box is an EMC CLARiiON VMX 5700. We are running SLES 10SP2. Any suggestions to solve this? Regards, V�ctor Echavarry D�az [email protected]<mailto:[email protected]> System Programmer Technology Systems & Operations Division EVERTEC 787-759-9999 Ext. 3401 [cid:[email protected]] ----------------------------------------- CONFIDENTIALITY NOTE: This email communication and its attachments contain information that are proprietary and confidential to EVERTEC, INC., its affiliates or its clients. They may not be disclosed, distributed, used, copied or modified in any way without EVERTEC, Inc.’s authorization. If you are not the intended recipient of this email, you are not an authorized person. Please delete it and notify the sender immediately. EVERTEC, Inc. and its affiliates do not assume any liability for damages resulting from emails that have been sent or altered without their consent. Moreover, EVERTEC, Inc. has taken precautions to safeguard its email communications, but cannot assure that such is the case and disclaim any responsibility attributable thereto. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
<<inline: image001.jpg>>
