Mark: I begin the update and when I reboot, the system give the following message FATAL: Could not load /lib/modules/2.6.16.60-0.21-default/modules.dep: No such f ile or directory
The module lib is /lib/modules/2.6.16.60-0.42.10-default how I solve this. Regards. V�ctor Echavarry [email protected] System Programmer Technology Systems & Operations Division EVERTEC 787-759-9999 Ext. 3401 -----Original Message----- From: Linux on 390 Port [mailto:[email protected]] On Behalf Of Mark Post Sent: Thursday, September 08, 2011 1:35 PM To: [email protected] Subject: Re: EMC fcp problem >>> On 9/8/2011 at 11:13 AM, Victor Echavarry Diaz <[email protected]> wrote: > Every time we try to define a LVM at the mapper its cancel. You shouldn't be trying to use /dev/mapper, you should be using /dev/disk/by-id/. > The Box is an EMC CLARiiON VMX 5700. We are running SLES 10SP2. Any > suggestions to solve this? Try using a supported version of the operating system? Say SLES10 SP4 or SLES11 SP1? There have been an awful lot of zFCP changes and fixes since SP2 was out of service. Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/ ----------------------------------------- CONFIDENTIALITY NOTE: This email communication and its attachments contain information that are proprietary and confidential to EVERTEC, INC., its affiliates or its clients. They may not be disclosed, distributed, used, copied or modified in any way without EVERTEC, Inc.’s authorization. If you are not the intended recipient of this email, you are not an authorized person. Please delete it and notify the sender immediately. EVERTEC, Inc. and its affiliates do not assume any liability for damages resulting from emails that have been sent or altered without their consent. Moreover, EVERTEC, Inc. has taken precautions to safeguard its email communications, but cannot assure that such is the case and disclaim any responsibility attributable thereto. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
