Hello, I am trying to install Fedora18-S390X with Hercules-390 v 3.08 on Mac OS X Mountain Lion (10.8.3). I was having the issue with standard Hercules 3.07 so I downloaded source and compiled v 3.08.
I set up the reader 00C to read in the initial IPL files. It seems that my LCS set-up never managed to connect because I am unable to ping the IP address of the LCS: 192.168.202.1 In hercule config file, my LCS is defined as: 0600.2 LCS -n /dev/tun2 -o fedora18.lcsoat My OAT is as follows: ********************************************************** * Dev Mode Port Entry Specific info ********************************************************** 0600 IP 00 PRI 192.168.202.1 HWADD 00 02:00:02:00:02:00 ROUTE 00 192.168.202.1 255.255.255.0 The parm file: generic.prm contents is as follows: rd.znet=lcs,0.0.0600,0.0.0601,portno=0 ip=192.168.202.1::192.168.202.2:24:fedora18.beaulieumichel.com:eth0:none root=live:http://192.168.202.2/~michel/fedora18live/images/install.img repo=http://192.168.202.2/~michel/fedora18live/ ro ramdisk_size=50030 cio_ignore=all,!0.0.0009 vac rd.dasd=0.0.0200 nameserver=10.20.30.40 I welcome any suggestions to get Hercules-390 LCS to work for Fedora 18 s390x. Thanks! Michel Beaulieu |*| /* The postings on this site are my own and don’t necessarily represent positions, strategies or opinions of my employer: IBM. */ ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
