> -----Original Message-----
> From: Linux on 390 Port On Behalf Of Mark Post
>
> >>> On 10/23/2013 at 11:58 AM, "Chase, John" <[email protected]> wrote:
> > After learning "the hard way" that vi doesn't play well with a 3270
> > console session, we tried changing the IP address of a Linux machine
> > in ifcfg-eth0 with sed. After changing the address and rebooting
> > Linux (probably overkill, but....), we are unable to connect a putty
> > session to Linux with the workstation connected to the DR network. On
> > the 3270 console, we issue ifconfig and see that eth0 has the DR
> > network addresses; but still we cannot connect to it with putty.
> >
> > Any ideas or suggestions?
>
> Did you also change the default gateway for the systems?
Yes.
-jc-
**********************************************************************
Information contained in this e-mail message and in any attachments thereto is
confidential. If you are not the intended recipient, please destroy this
message, delete any copies held on your systems, notify the sender immediately,
and refrain from using or disclosing all or any part of its content to any
other person.
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
