Don't rename ifcfg-eth0 to ifcfg-eth0anything. When the network starts, it
will read *every* file named ifcfg-* and try to put it online. Try renaming
to original-ifcfg-eth0. Running "service network reload" is enough to
re-read all the files, no need to reboot.

If you still cannot connect, try some commands to see what is wrong:
netstat -nr
ifconfig -a
lsqeth
ping -c2 gateway-ip
tracepath -n outside-ip



Mauro
http://mauro.limeiratem.com - registered Linux User: 294521
Scripture is both history, and a love letter from God.


2013/10/23 Chase, John <[email protected]>

> > -----Original Message-----
> > From: Linux on 390 Port On Behalf Of Mark Post
> >
> > >>> On 10/23/2013 at 11:58 AM, "Chase, John" <[email protected]> wrote:
> > > After learning "the hard way" that vi doesn't play well with a 3270
> > > console session, we tried changing the IP address of a Linux machine
> > > in ifcfg-eth0 with sed.  After changing the address and rebooting
> > > Linux (probably overkill, but....), we are unable to connect a putty
> > > session to Linux with the workstation connected to the DR network.  On
> > > the 3270 console, we issue ifconfig and see that eth0 has the DR
> > > network addresses; but still we cannot connect to it with putty.
> > >
> > > Any ideas or suggestions?
> >
> > Did you also change the default gateway for the systems?
>
> Yes.
>
>     -jc-
>
> **********************************************************************
> Information contained in this e-mail message and in any attachments
> thereto is confidential. If you are not the intended recipient, please
> destroy this message, delete any copies held on your systems, notify the
> sender immediately, and refrain from using or disclosing all or any part of
> its content to any other person.
>
> ----------------------------------------------------------------------
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO LINUX-390 or
> visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390
> ----------------------------------------------------------------------
> For more information on Linux on System z, visit
> http://wiki.linuxvm.org/
>

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/

Reply via email to