Mine shows this when there is actually a problem with the OSA .. such as not being cabled correctly or the switch port not being activated, etc.. are you sure the OSA at 160 port 0 is cabled up to an active switch port and ready to communicate?
Scott Rohling On Tue, Mar 4, 2014 at 12:16 PM, Tom Burkholder <[email protected]>wrote: > I just noticed that my DTCVSW2 controller is showing Error: BACKUP Not > ready from the q vswitch command (probably not a good thing). Looks like > the paths are online. Does anybody know how to get the backup controller > DTCVSW2 back into a "ready" state (without taking an TCPIP burp or outage)? > This is a z/VM 6.2 single VM system. > > > q vswitch > VSWITCH SYSTEM VSWZVMA1 Type: QDIO Connected: 18 Maxconn: INFINITE > PERSISTENT RESTRICTED NONROUTER Accounting: OFF > USERBASED > VLAN Unaware > MAC address: 02-62-00-00-00-01 MAC Protection: OFF > IPTimeout: 5 QueueStorage: 8 > Isolation Status: OFF > Uplink Port: > State: Ready > PMTUD setting: EXTERNAL PMTUD value: 8992 > RDEV: 0154.P01 VDEV: 0600 Controller: DTCVSW1 > RDEV: 0160.P00 VDEV: 0600 Controller: DTCVSW2 Error: BACKUP Not ready > > q controller > Controller DTCVSW1 Available: YES VDEV Range: 0600-F000 Level 620 > Capability: IP ETHERNET VLAN_ARP GVRP LINKAGG ISOLATION > NO_ENSEMBLE NO_INMN BRIDGE_CAPABLE > SYSTEM VSWZVMA1 Primary Controller: * RDEV: 0154 > Controller DTCVSW2 Available: YES VDEV Range: 0600-F000 Level 620 > Capability: IP ETHERNET VLAN_ARP GVRP LINKAGG ISOLATION > NO_ENSEMBLE NO_INMN BRIDGE_CAPABLE > SYSTEM VSWZVMA1 Backup Controller: * RDEV: 0160 > > q path 154 > Device 0154, Status ONLINE > CHPIDs to Device 0154 (PIM) : 06 > Physically Available (PAM) : + > Online (LPM) : + > Legend + Yes - No > q path 160 > Device 0160, Status ONLINE > CHPIDs to Device 0160 (PIM) : 07 > Physically Available (PAM) : + > Online (LPM) : + > Legend + Yes - No > > > > > > > ---------------------------- > This message (including any attachments) contains confidential information > intended for a specific individual and purpose, and is protected by law. If > you are not the intended recipient of this e-mail (even if the e-mail > address above is yours), (i) you may not use, copy or retransmit it, (ii) > please delete this message and (iii) please notify the sender immediately. > Any disclosure, copying, or distribution of this message or the taking of > any action based on it, is strictly prohibited. > ---------------------------- > > > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
