Is the 01b0 also a replica from the other datacenter created same way as 01b1? Probably not, because the serial number matches the address 01b0: dasd(eckd): 0.0.01b0: (4kB blks): 108000kB at 48kB/trk compatible disk layout dasda:VOL1/ ------> 0X01B0 <-----
Which is not the case with dasd(eckd): 0.0.01b1: (4kB blks): 525600kB at 48kB/trk compatible disk layout dasdb:VOL1/ -----> 0XDA11: <---- Which indicates that it was a clone from another device. Did that disk have a different device address in the other datacenter? Would it be possible to do also a replica of the boot device as well? I assume that this system is booting fine and mounting root without problems in the original location? Gregory 2014-09-03 7:59 GMT-04:00 James Vincent <[email protected]>: > blkid output from mounting that same disk on another SLES 10 server: > /dev/dasdx1: UUID="429cf6d1-cb6f-409c-9e4a-b29efe8f94e0" SEC_TYPE="ext2" > TYPE="ext3" > > > -- *James Vincent* > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
