Hi, I have already configured a z/VM SSI cluster with 4 LPARs. When I revisited the Cookbook at Section 2.8.5 z/VM DASD used in this book. Table 2-8, I can see DASD are reserved for LNXMAINT(191-192), LNXADMIN (101), LNXADMIN (100) for member 1 LNXADMIN (100) and LNXADMIN (100) for member 2
Our system has 4 z/VM LPARs. Should I also reserve DASDs LNXADMIN(100) and (101) for member 3 and 4 ? They should have the same setting as the member? Please advise. Thanks, Ray ----------------------------------------- The information contained in this e-mail, including any attachment(s), is intended solely for use by the named addressee(s). If you are not the intended recipient, or a person designated as responsible for delivering such messages to the intended recipient, you are not authorized to disclose, copy, distribute or retain this message, in whole or in part, without written authorization from PSEG. This e-mail may contain proprietary, confidential or privileged information. If you have received this message in error, please notify the sender immediately. This notice is included in all e-mail messages leaving PSEG. Thank you for your cooperation. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
