Ray,

> But I am unable to use zVM2, zVM3 and zVM4 to do any cloning at all.
What error are you getting?

The golden image is a USER, not an IDENTITY, right?  If the minidisk
volume(s) of the golden image are available to all member systems, then you
should be OK.

    -Mike

On Thu, Dec 11, 2014 at 12:14 PM, Chu, Raymond <[email protected]> wrote:

> Mike,
>
> I actually have the following set up shown below:
>
> IDENTITY LNXADMIN PASSWORD 256M 1G BG
>  INCLUDE LNXDFLT
>   BUILD ON   zVM1         USING SUBCONFIG LNXADM-1
>   BUILD ON   zVM2         USING SUBCONFIG LNXADM-2
>   BUILD ON   zVM3         USING SUBCONFIG LNXADM-3
>   BUILD ON   zVM4         USING SUBCONFIG LNXADM-4
>   OPTION LNKNOPAS
>   SUBCONFIG LNXADM-1
>    MDISK 0100 3390 0001 10016 VM1091 MR PASSWORD PASSWORD PASSWORD
>    MDISK 0101 3390 0521  9496 VM1090 MR PASSWORD PASSWORD PASSWORD
>   SUBCONFIG LNXADM-2
>    MDISK 0100 3390 0001 10016 VM1525 MR PASSWORD PASSWORD PASSWORD
>    MDISK 0101 3390 0521  9496 VM1526 MR PASSWORD PASSWORD PASSWORD
> SUBCONFIG LNXADM-3
>    MDISK 0100 3390 0001 10016 VM149E MR PASSWORD PASSWORD PASSWORD
>    MDISK 0101 3390 0521  9496 VM149F MR PASSWORD PASSWORD PASSWORD
> SUBCONFIG LNXADM-4
>    MDISK 0100 3390 0001 10016 VM1527 MR PASSWORD PASSWORD PASSWORD
>    MDISK 0101 3390 0521  9496 VM1528 MR PASSWORD PASSWORD PASSWORD
>
> It works great to use the zVM1 to do cloning and I can create zLinux z
> Images from the zVM1 LPAR.  But I am unable to use zVM2, zVM3 and zVM4 to
> do any cloning at all.
>
> I also cloned MDISK 100 (VM1091) of zVM1 to VM1525, VM149E and VM1527  and
> MDISK 101 (VM1090) of zVM1 to VM1526, VM149F and VM1528. Understood that
> the MISK 101 started at 521 because 1 to 520 were used by LNXMAINT for two
> virtual mode A and D for SWAPGEN, RH65GOLD and LNXADMIN parameters and
> configurations and so on.
>
> I have been communicating with IBM Link to figure how to create Linux on
> System z from zVM2, zVM3 and zVM4 and I am kind of out of resource. Since
> you were the Master of the RedBook and you still are.  Could you please
> show and tell me what went wrong?
>
> The reason that I am looking for this particular configuration is because
> I want to configure zLinux images from a particular LPARs to pick up
> particular range of predefined mac prefix.
>
> Thanks,
>
> Ray
>
> -----Original Message-----
> From: Linux on 390 Port [mailto:[email protected]] On Behalf Of
> Michael MacIsaac
> Sent: Friday, November 14, 2014 2:43 PM
> To: [email protected]
> Subject: Re: Question on The Virtualization Cookbook for IVM z/VM V6.3
>
> Email sent from outside of PSEG. Use caution before using
> links/attachments.
>
>
> Ray,
>
> Yes. The idea here is to have one administrative Linux per LPAR (SSI
> member).  With an IDENTITY, all four can/should be running at the same time.
>
> We had 100 and 101 minidisks in an earlier Cookbook so as to have two
> 3390-3s. In the current cookbook we split a 3390-9 in half which may not
> make the most sense, but it still works. If you have the disk space, you
> might want to make both 100 and 101 full mod-9s to leave a little more room
> for growth.
>
>     -Mike
>
> On Fri, Nov 14, 2014 at 1:28 PM, Chu, Raymond <[email protected]>
> wrote:
>
> > Hi,
> >
> > I have already configured a z/VM SSI cluster with 4 LPARs. When I
> > revisited the Cookbook at Section 2.8.5 z/VM DASD used in this book.
> > Table 2-8, I can see DASD are reserved for LNXMAINT(191-192), LNXADMIN
> > (101), LNXADMIN (100) for member 1 LNXADMIN (100) and LNXADMIN (100)
> > for member 2
> >
> > Our system has 4 z/VM LPARs.  Should I also reserve DASDs
> > LNXADMIN(100) and (101) for member 3 and 4 ? They should have the same
> > setting as the member? Please advise.
> >
> > Thanks,
> > Ray
> >
> >
> >
> > -----------------------------------------
> >
> > The information contained in this e-mail, including any attachment(s),
> > is intended solely for use by the named addressee(s).  If you are not
> > the intended recipient, or a person designated as responsible for
> > delivering such messages to the intended recipient, you are not
> > authorized to disclose, copy, distribute or retain this message, in
> > whole or in part, without written authorization from PSEG.  This
> > e-mail may contain proprietary, confidential or privileged
> > information. If you have received this message in error, please notify
> > the sender immediately. This notice is included in all e-mail messages
> > leaving PSEG.  Thank you for your cooperation.
> >
> > ----------------------------------------------------------------------
> > For LINUX-390 subscribe / signoff / archive access instructions, send
> > email to [email protected] with the message: INFO LINUX-390 or
> > visit
> > http://www.marist.edu/htbin/wlvindex?LINUX-390
> > ----------------------------------------------------------------------
> > For more information on Linux on System z, visit
> > http://wiki.linuxvm.org/
> >
>
> ----------------------------------------------------------------------
> For LINUX-390 subscribe / signoff / archive access instructions, send
> email to [email protected] with the message: INFO LINUX-390 or visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390
> ----------------------------------------------------------------------
> For more information on Linux on System z, visit http://wiki.linuxvm.org/
>
>
> -----------------------------------------
> The information contained in this e-mail, including any attachment(s), is
> intended solely for use by the named addressee(s).  If you are not the
> intended recipient, or a person designated as responsible for delivering
> such messages to the intended recipient, you are not authorized to
> disclose, copy, distribute or retain this message, in whole or in part,
> without written authorization from PSEG.  This e-mail may contain
> proprietary, confidential or privileged information. If you have received
> this message in error, please notify the sender immediately. This notice is
> included in all e-mail messages leaving PSEG.  Thank you for your
> cooperation.
>

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/

Reply via email to