>>> On 2/4/2019 at 11:37 AM, "Will, Chris" <cw...@bcbsm.com> wrote: > We have auto lun scan turned on for our SLES 11 SP4 hosts and it is on by > default for our SLES 12 SP3 hosts. We are trying to insert a Cirrus device > which has the capability to discover LUNs and NPIV WWNs. My very limited > understanding of the process, during the initial boot process (z/VM IPL) it > initially will report back no LUNs to the guest, logs into the storage device > and then reports back to the guest with the LUNs that are masked for the NPIV
Man, what a horrible hardware design. > WWPN. This does not seem to give the SLES 12 guests issues but most of the > SLES 11 guests have issues. Is there anyway for the guest to do a retry, > otherwise it ends up in emergency repair mode (setting we have in fstab). If you have the sg3_utils package installed, and the disks necessary for /usr to get mounted are available, you can use the rescan-scsi-bus.sh script. If /usr isn't able to be mounted, then you can try to do manually what the script does. Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
