Ooops.. sorry in field qc_cluster_name
===== Layer 2: z/VM-hypervisor =============================================
qc_layer_type [n/a]: z/VM-hypervisor
qc_layer_category [n/a]: HOST
qc_layer_type_num [n/a]: 3
qc_layer_category_num [n/a]: 2
qc_layer_name [ V]: Z01PROD1
qc_cluster_name [ V]: SSIPROD
On Wed, Jul 8, 2020 at 1:55 PM Rogério Soares <[email protected]>
wrote:
> I use here https://github.com/openmainframeproject/qclib
>
> return many cool info as well SYSTEM NAME, on layer 2 listing on field:
> qc_layer_name
>
>
> ===== Layer 2: z/VM-hypervisor
> =============================================
> qc_layer_type [n/a]: z/VM-hypervisor
> qc_layer_category [n/a]: HOST
> qc_layer_type_num [n/a]: 3
> qc_layer_category_num [n/a]: 2
> * qc_layer_name [ V]: Z01PROD1*
>
>
>
>
> On Wed, Jul 8, 2020 at 1:15 PM Rich Smrcina <[email protected]>
> wrote:
>
>> VM00 Name.
>>
>> Rich Smrcina
>> Sr. Systems Engineer
>>
>> Velocity Software Inc.
>> Main: (650) 964-8867
>> Main: (877) 964-8867
>> [email protected] <mailto:[email protected]>
>>
>>
>> > On Jul 8, 2020, at 11:12 AM, Tully, Phil (CORP) <[email protected]>
>> wrote:
>> >
>> > When I look at /proc/sysinfo, I can see the LPAR name but I don’t see
>> the VM system name. Is there a place that the VM system name would be
>> shown from linux?
>> >
>> > LPAR Number: 2
>> > LPAR Characteristics: Shared
>> > LPAR Name: PLB2
>> > LPAR Adjustment: 390
>> > LPAR CPUs Total: 32
>> > LPAR CPUs Configured: 32
>> > LPAR CPUs Standby: 0
>> > LPAR CPUs Reserved: 0
>> > LPAR CPUs Dedicated: 0
>> > LPAR CPUs Shared: 32
>> > LPAR CPUs G-MTID: 0
>> > LPAR CPUs S-MTID: 1
>> > LPAR CPUs PS-MTID: 1
>> >
>> > VM00 Name: DMZLA004
>> > VM00 Control Program: z/VM 6.4.0
>> > VM00 Adjustment: 15
>> > VM00 CPUs Total: 1
>> > VM00 CPUs Configured: 1
>> > VM00 CPUs Standby: 0
>> > VM00 CPUs Reserved: 0
>> >
>> >
>> >
>> >
>> > Regards, Phil Tully
>> >
>> >
>> > ----------------------------------------------------------------------
>> > This message and any attachments are intended only for the use of the
>> addressee and may contain information that is privileged and confidential.
>> If the reader of the message is not the intended recipient or an authorized
>> representative of the intended recipient, you are hereby notified that any
>> dissemination of this communication is strictly prohibited. If you have
>> received this communication in error, notify the sender immediately by
>> return email and delete the message and any attachments from your system.
>> >
>> >
>> > ----------------------------------------------------------------------
>> > For LINUX-390 subscribe / signoff / archive access instructions,
>> > send email to [email protected] with the message: INFO LINUX-390
>> or visit
>> > http://www2.marist.edu/htbin/wlvindex?LINUX-390
>>
>>
>> ----------------------------------------------------------------------
>> For LINUX-390 subscribe / signoff / archive access instructions,
>> send email to [email protected] with the message: INFO LINUX-390 or
>> visit
>> http://www2.marist.edu/htbin/wlvindex?LINUX-390
>>
>
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www2.marist.edu/htbin/wlvindex?LINUX-390
