Am 21.10.20 um 23:25 schrieb Mark Post: > On 10/20/20 11:02 PM, Phil Tully wrote: >> This is SLES12 Sp4 > Hmm. I checked, and the message is the same for that version of the > kernel. If you're sure that is the complete message, and not being > truncated, and the system is running the most recent kernel for that > release, then I would say it's time to open up a support request. > > > Mark Post > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO LINUX-390 or visit > http://www2.marist.edu/htbin/wlvindex?LINUX-390
The message usually contain the device UID which it is compared to. To me the messages seem to be truncated. The UID itself is too short either. The last portion of it should have 32 digits not only 15 like here. Did you copy it from a 3270 terminal or where did you get those messages from? You can also compare (at least the printed part of) the UID by yourself using 'lsdasd -u' which gives you the UIDs of the devices that are currently in use. Another thing I have to mention is that there are messages for 7 channel paths. The first one (path mask 0x80) is missing. It may be non-existent which would be OK but it is likely that the UID of the first channel path differs. The messages are only printed for paths that have a _different_ UID from the device UID (which is the UID of the first validated path). But first of all please have a look if you can get the complete messages from the Linux system log. Regards, Stefan ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www2.marist.edu/htbin/wlvindex?LINUX-390
