Hi,

yes, this is at least used to uniquely identify minidisk based DASD
devices in Linux under z/VM.
On LPAR you will not find this part.

Am 22.10.20 um 16:09 schrieb burgess, christopher:
> Stefan,
> Look at one of my guests. I can see that:
> - ATVHC = serial # of the box
> - 3000 = SSID in array configuration
> - 0f = unit address in the array configuration
> Is 00000001000001f40000000000000000 the zVM specific part?
>
>
>
> Thanks,
> Chris Burgess
> Phone: 1-774-350-9775
> Fax: 1-508-544-2076
> Email: [email protected]
>
> -----Original Message-----
> From: Linux on 390 Port <[email protected]> On Behalf Of Stefan 
> Haberland
> Sent: Thursday, October 22, 2020 10:03 AM
> To: [email protected]
> Subject: Re: Virtual device
>
>
> [EXTERNAL EMAIL] 
>
> OK, thanks for the complete log.
>
> For whatever reason the first path was given a UID without the z/VM specific 
> part.
> If you call lsdasd -u it should state also only
>
> EMC.090000000ATVHC.3000.0f
>
> for this disk.
>
> You may want to try to set the device offline and online again in Linux and 
> see if this helps.
>
> Regards,
> Stefan
>
>
> Am 22.10.20 um 15:41 schrieb Tully, Phil (CORP):
>> Sorry the log I was given was cut off
>>
>> "dasd-eckd.fe3f84: 0.0.0191: Not all channel paths lead to the same device, 
>> path 40 leads to device 
>> EMC.090000000ATVHC.3000.0f.00000001000001f40000000000000000 instead of 
>> EMC.090000000ATVHC.3000.0f"
>> "dasd-eckd.fe3f84: 0.0.0191: Not all channel paths lead to the same device, 
>> path 20 leads to device 
>> EMC.090000000ATVHC.3000.0f.00000001000001f40000000000000000 instead of 
>> EMC.090000000ATVHC.3000.0f"
>> "dasd-eckd.fe3f84: 0.0.0191: Not all channel paths lead to the same device, 
>> path 10 leads to device 
>> EMC.090000000ATVHC.3000.0f.00000001000001f40000000000000000 instead of 
>> EMC.090000000ATVHC.3000.0f"
>> "dasd-eckd.fe3f84: 0.0.0191: Not all channel paths lead to the same device, 
>> path 08 leads to device 
>> EMC.090000000ATVHC.3000.0f.00000001000001f40000000000000000 instead of 
>> EMC.090000000ATVHC.3000.0f"
>> "dasd-eckd.fe3f84: 0.0.0191: Not all channel paths lead to the same device, 
>> path 04 leads to device 
>> EMC.090000000ATVHC.3000.0f.00000001000001f40000000000000000 instead of 
>> EMC.090000000ATVHC.3000.0f"
>> "dasd-eckd.fe3f84: 0.0.0191: Not all channel paths lead to the same device, 
>> path 02 leads to device 
>> EMC.090000000ATVHC.3000.0f.00000001000001f40000000000000000 instead of 
>> EMC.090000000ATVHC.3000.0f"
>> "dasd-eckd.fe3f84: 0.0.0191: Not all channel paths lead to the same device, 
>> path 01 leads to device 
>> EMC.090000000ATVHC.3000.0f.00000001000001f40000000000000000 instead of 
>> EMC.090000000ATVHC.3000.0f"
>>
>> Regards, Phil Tully
>> Chief Architect-z/VM & z/Linux
>> [email protected]
>> cell: 973-202-7427
>> 1-800 377-0237,,5252697#
>>
>>
>>
>> On 10/21/20, 5:26 PM, "Linux on 390 Port on behalf of Mark Post" 
>> <[email protected] on behalf of [email protected]> wrote:
>>
>>
>>     WARNING: Do not click links or open attachments unless you recognize the 
>> source of the email and know the contents are safe. 
>>
>>     **********************************************************************
>>     On 10/20/20 11:02 PM, Phil Tully wrote:
>>
>>     > This is SLES12 Sp4
>>
>>
>>
>>     Hmm. I checked, and the message is the same for that version of 
>> the
>>
>>     kernel. If you're sure that is the complete message, and not being
>>
>>     truncated, and the system is running the most recent kernel for 
>> that
>>
>>     release, then I would say it's time to open up a support request.
>>
>>
>>
>>
>>
>>     Mark Post
>>
>>
>>
>>     
>> ----------------------------------------------------------------------
>>
>>     For LINUX-390 subscribe / signoff / archive access instructions,
>>
>>     send email to [email protected] with the message: INFO 
>> LINUX-390 or visit
>>
>>     
>> https://urldefense.proofpoint.com/v2/url?u=http-3A__www2.marist.edu_ht
>> bin_wlvindex-3FLINUX-2D390&d=DwICaQ&c=xu_5lAfKHjInGFR3ndoZrw&r=YINhRQB
>> nBpDTaiDeBIX-uouJy__emITEWU-E34BcxvU&m=mjWhI8Uhc9v0EQScLVDIz7j32_VHZ1r
>> VRSsr0mWa9Is&s=ynuAOJEVSmJCQgt55GIs5QJIMbQ_A1h6dNxn3iFi-Tc&e=
>>
>>
>>
>> ----------------------------------------------------------------------
>> This message and any attachments are intended only for the use of the 
>> addressee and may contain information that is privileged and confidential. 
>> If the reader of the message is not the intended recipient or an authorized 
>> representative of the intended recipient, you are hereby notified that any 
>> dissemination of this communication is strictly prohibited. If you have 
>> received this communication in error, notify the sender immediately by 
>> return email and delete the message and any attachments from your system.
>>
>>
>> ----------------------------------------------------------------------
>> For LINUX-390 subscribe / signoff / archive access instructions, send 
>> email to [email protected] with the message: INFO LINUX-390 or 
>> visit
>> http://www2.marist.edu/htbin/wlvindex?LINUX-390
> ----------------------------------------------------------------------
> For LINUX-390 subscribe / signoff / archive access instructions, send email 
> to [email protected] with the message: INFO LINUX-390 or visit
> http://www2.marist.edu/htbin/wlvindex?LINUX-390
>
> ----------------------------------------------------------------------
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO LINUX-390 or visit
> http://www2.marist.edu/htbin/wlvindex?LINUX-390

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www2.marist.edu/htbin/wlvindex?LINUX-390

Reply via email to