From: Marek W <[EMAIL PROTECTED]>

Add support for W3000 (W3V) and indirectly fixes an issue with kmilo under
KDE (it was triggering excessive LCD read error messages by querying
asus_acpi module) allowing people (I am probably the only one who tested
this) with W3000 to run kmilo.


Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---

 drivers/acpi/asus_acpi.c |   19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff -puN drivers/acpi/asus_acpi.c~asus_acpi-w3000-support 
drivers/acpi/asus_acpi.c
--- a/drivers/acpi/asus_acpi.c~asus_acpi-w3000-support
+++ a/drivers/acpi/asus_acpi.c
@@ -131,6 +131,7 @@ struct asus_hotk {
                P30,            //Samsung P30
                S1x,            //S1300A, but also L1400B and M2400A (L84F)
                S2x,            //S200 (J1 reported), Victor MP-XP7210
+               W3V,            //W3030V
                xxN,            //M2400N, M3700N, M5200N, S1300N, S5200N, W1OOON
                //(Centrino)
                END_MODEL
@@ -345,6 +346,17 @@ static struct model_data model_conf[END_
         .brightness_down = S2x_PREFIX "_Q0A"},
 
        {
+        .name = "W3V",
+        .mt_mled = "MLED",
+        .mt_wled = "WLED",
+        .mt_lcd_switch = xxN_PREFIX "_Q10",
+        .lcd_status = "\\BKLT",
+        .brightness_set = "SPLV",
+        .brightness_get = "GPLV",
+        .display_set = "SDSP",
+        .display_get = "\\INFB"},
+
+       {
         .name = "xxN",
         .mt_mled = "MLED",
 /* WLED present, but not controlled by ACPI */
@@ -1066,6 +1078,8 @@ static int asus_hotk_get_info(void)
                hotk->model = S2x;
        else if (strncmp(model->string.pointer, "L5", 2) == 0)
                hotk->model = L5x;
+       else if (strncmp(model->string.pointer, "W3V", 3) == 0)
+               hotk->model = W3V;
 
        if (hotk->model == END_MODEL) {
                printk("unsupported, trying default values, supply the "
@@ -1087,9 +1101,10 @@ static int asus_hotk_get_info(void)
                hotk->methods->mt_mled = NULL;
        /* S5N and M5N have no MLED */
        else if (strncmp(model->string.pointer, "M2N", 3) == 0 ||
-                strncmp(model->string.pointer, "W1N", 3) == 0)
+                strncmp(model->string.pointer, "W1N", 3) == 0 ||
+                strncmp(model->string.pointer, "W3V", 3) == 0)
                hotk->methods->mt_wled = "WLED";
-       /* M2N and W1N have a usable WLED */
+       /* M2N, W1N and W3V have a usable WLED */
        else if (asus_info) {
                if (strncmp(asus_info->oem_table_id, "L1", 2) == 0)
                        hotk->methods->mled_status = NULL;
_
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to