as fadt_info_table[] and acpi_tb_convert_fadt()
will always put the valid address at acpi_gbl_FADT.xpm2_control_block --
that is the only one you need to check, and you don't need to check
FADT version.

thanks,
-Len
 

>-----Original Message-----
>From: Pallipadi, Venkatesh 
>Sent: Friday, June 08, 2007 6:16 PM
>To: Pallipadi, Venkatesh
>Cc: Brown, Len; Moore, Robert; [email protected]
>Subject: Re: [PATCH] check xpm2_control_block while setting bm_control
>
>On Fri, Jun 08, 2007 at 03:09:47PM -0700, Pallipadi, Venkatesh wrote:
>> 
>> 
>> Ooops. Sent the wrong/old version of the patch.
>> Len - Please do not apply this I will send a new one.
>> 
>> Thanks,
>> Venki 
>> 
>Below is the proper patch I wanted to send earlier.
>Thanks,
>Venki
>
>
>
>Check both pm2_control_block and cpm2_control_block for 
>bm_control. It should
>be better to do this with checking of address from consolidated
>fadt_info_table[]. But, that will need some changes in acpica tables.
>
>Signed-off-by: Venkatesh Pallipadi <[EMAIL PROTECTED]>
>
>Index: linux-2.6.22-rc-mm/drivers/acpi/processor_core.c
>===================================================================
>--- linux-2.6.22-rc-mm.orig/drivers/acpi/processor_core.c      
>2007-06-07 11:33:00.000000000 -0700
>+++ linux-2.6.22-rc-mm/drivers/acpi/processor_core.c   
>2007-06-08 14:26:32.000000000 -0700
>@@ -524,8 +524,15 @@
>       /*
>        * Check to see if we have bus mastering arbitration 
>control.  This
>        * is required for proper C3 usage (to maintain cache 
>coherency).
>+       * Check both pm2_control_block and xpm2_control_block
>        */
>-      if (acpi_gbl_FADT.pm2_control_block && 
>acpi_gbl_FADT.pm2_control_length) {
>+      if ((acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
>+           acpi_gbl_FADT.xpm2_control_block.space_id ==
>+                                               
>ACPI_ADR_SPACE_SYSTEM_IO &&
>+           acpi_gbl_FADT.xpm2_control_block.address &&
>+           acpi_gbl_FADT.xpm2_control_block.bit_width) ||
>+          (acpi_gbl_FADT.pm2_control_block &&
>+           acpi_gbl_FADT.pm2_control_length)) {
>               pr->flags.bm_control = 1;
>               ACPI_DEBUG_PRINT((ACPI_DB_INFO,
>                                 "Bus mastering arbitration 
>control present\n"));
>
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to