"thermal.psv=0" disables passive trip points
for all ACPI thermal zones.
"thermal.psv=C", where 'C' is degrees Celcius,
overrides existing passive trip points
for all ACPI thermal zones.
thermal.psv is checked at module load time,
and in response to trip-point change events.
Note that if the system does not deliver thermal zone
temperature change events near the new trip-point,
then it will not be noticed. To force it to be
noticed, you can enable polling:
eg. thermal.tzp=3000 invokes polling every 5 minutes.
Note that once passive thermal throttling is invoked,
it has its own internal polling frequencey that is
independent of tzp.
WARNING: disabling or raising a thermal trip point
will result in increased running temperature and
shorter hardware lifetime on some systems.
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
---
Documentation/kernel-parameters.txt | 4 ++++
drivers/acpi/thermal.c | 17 ++++++++++++++---
2 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/Documentation/kernel-parameters.txt
b/Documentation/kernel-parameters.txt
index 2c21ed4..9118fc6 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1823,6 +1823,10 @@ and is between 256 and 4096 characters. It is defined in
the file
thermal.off= [HW,ACPI]
1: disable ACPI thermal control
+ thermal.psv= [HW,ACPI]
+ 0: disable all passive trip points
+ <degrees C>: override all passive trip points to this
value
+
thermal.tzp= [HW,ACPI]
Specify global default ACPI thermal zone polling rate
<deci-seconds>: poll all this frequency
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index b6b3bec..9d7453c 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -82,6 +82,10 @@ static int off;
module_param(off, int, 0);
MODULE_PARM_DESC(off, "Set to disable ACPI thermal support.\n");
+static int psv = -1;
+module_param(psv, int, 0644);
+MODULE_PARM_DESC(psv, "Disable or override all passive trip points.\n");
+
static int acpi_thermal_add(struct acpi_device *device);
static int acpi_thermal_remove(struct acpi_device *device, int type);
static int acpi_thermal_resume(struct acpi_device *device);
@@ -343,9 +347,16 @@ static int acpi_thermal_get_trip_points(struct
acpi_thermal *tz)
/* Passive: Processors (optional) */
- status =
- acpi_evaluate_integer(tz->device->handle, "_PSV", NULL,
- &tz->trips.passive.temperature);
+ if (psv == 0) {
+ status = AE_SUPPORT;
+ } else if (psv > 0) {
+ tz->trips.passive.temperature = psv;
+ status = AE_OK;
+ } else {
+ status = acpi_evaluate_integer(tz->device->handle,
+ "_PSV", NULL, &tz->trips.passive.temperature);
+ }
+
if (ACPI_FAILURE(status)) {
tz->trips.passive.flags.valid = 0;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No passive threshold\n"));
--
1.5.3.rc4.29.g74276
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
