Subject: ACPI: thermal: create "thermal.psv=" to override passive trip points
From: Len Brown <[EMAIL PROTECTED]>
"thermal.psv=-1" disables passive trip points
for all ACPI thermal zones.
"thermal.psv=C", where 'C' is degrees Celsius,
overrides all existing passive trip points
for all ACPI thermal zones.
thermal.psv is checked at module load time,
and in response to trip-point change events.
Note that if the system does not deliver thermal zone
temperature change events near the new trip-point,
then it will not be noticed. To force your custom
trip point to be noticed, you may need to enable polling:
eg. thermal.tzp=3000 invokes polling every 5 minutes.
Note that once passive thermal throttling is invoked,
it has its own internal Thermal Sampling Period (_TSP),
that is unrelated to _TZP.
WARNING: disabling or raising a thermal trip point
may result in increased running temperature and
shorter hardware lifetime on some systems.
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
---
This updates the previous version of this patch
so that -1 disables _PSV (instead of 0),
and the user's Celsius value is properly converted
to Kelvin*10 for internal use.
Index: linus/Documentation/kernel-parameters.txt
===================================================================
--- linus.orig/Documentation/kernel-parameters.txt
+++ linus/Documentation/kernel-parameters.txt
@@ -1823,6 +1823,10 @@ and is between 256 and 4096 characters.
thermal.off= [HW,ACPI]
1: disable ACPI thermal control
+ thermal.psv= [HW,ACPI]
+ -1: disable all passive trip points
+ <degrees C>: override all passive trip points to this
value
+
thermal.tzp= [HW,ACPI]
Specify global default ACPI thermal zone polling rate
<deci-seconds>: poll all this frequency
Index: linus/drivers/acpi/thermal.c
===================================================================
--- linus.orig/drivers/acpi/thermal.c
+++ linus/drivers/acpi/thermal.c
@@ -82,6 +82,10 @@ static int off;
module_param(off, int, 0);
MODULE_PARM_DESC(off, "Set to disable ACPI thermal support.\n");
+static int psv;
+module_param(psv, int, 0644);
+MODULE_PARM_DESC(psv, "Disable or override all passive trip points.\n");
+
static int acpi_thermal_add(struct acpi_device *device);
static int acpi_thermal_remove(struct acpi_device *device, int type);
static int acpi_thermal_resume(struct acpi_device *device);
@@ -343,9 +347,16 @@ static int acpi_thermal_get_trip_points(
/* Passive: Processors (optional) */
- status =
- acpi_evaluate_integer(tz->device->handle, "_PSV", NULL,
- &tz->trips.passive.temperature);
+ if (psv == -1) {
+ status = AE_SUPPORT;
+ } else if (psv > 0) {
+ tz->trips.passive.temperature = CELSIUS_TO_KELVIN(psv);
+ status = AE_OK;
+ } else {
+ status = acpi_evaluate_integer(tz->device->handle,
+ "_PSV", NULL, &tz->trips.passive.temperature);
+ }
+
if (ACPI_FAILURE(status)) {
tz->trips.passive.flags.valid = 0;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No passive threshold\n"));
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
