Hi
The patch 0e4c2eeb758a91e68b9eaf7a4bee9bd5ed97ff2b ("alpha/PCI: Replace
pci_fixup_irqs() call with host bridge IRQ mapping hooks") breaks
networking on Alpha for me. I have an Alpha Avanti server with tulip
network card.
The patch 0e4c2eeb breaks it so that I get MCE when the network card
driver is loaded. The patch 814eae59 fixes the MCE, the system boot
completes, but the network card doesn't receive any interrupts (and soon
it reports warning about timeout on tx queue). All kernels in the 4.14
branch have this bug.
Mikulas
# cat /proc/interrupts
CPU0
1: 3 XT-PIC i8042
2: 0 XT-PIC cascade
4: 752 XT-PIC ttyS0
8: 58118 dummy -RTC timer
10: 1613 XT-PIC ide0, ide1
11: 739 XT-PIC sym53c8xx
12: 5 XT-PIC i8042
15: 0 XT-PIC eth0 <--- note that the counter is zero
PMI: 0 Performance Monitoring
ERR: 0
# lspci -vv
00:06.0 SCSI storage controller: LSI Logic / Symbios Logic 53c810 (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 255
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 8000 [size=256]
Region 1: Memory at 01300000 (32-bit, non-prefetchable) [size=256]
Kernel driver in use: sym53c8xx
Kernel modules: sym53c8xx
00:07.0 ISA bridge: Intel Corporation 82378ZB/IB, 82379AB (SIO, SIO.A) PCI to
ISA Bridge (rev 43)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:0b.0 Ethernet controller: Digital Equipment Corporation DECchip 21140
[FasterNet] (rev 22)
Subsystem: Digital Equipment Corporation DECchip 21140 [FasterNet]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 255 (5000ns min, 10000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 8400 [size=128]
Region 1: Memory at 01302000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at 01280000 [disabled] [size=256K]
Kernel driver in use: tulip
Kernel modules: tulip
00:0c.0 Display controller: Digital Equipment Corporation DECchip 21030 [TGA]
(rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 255
Interrupt: pin A routed to IRQ 5
Region 0: Memory at 02000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at 012c0000 [disabled] [size=256K]
Kernel driver in use: tgafb
00:0d.0 RAID bus controller: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host
Controller (rev 02)
Subsystem: Silicon Image, Inc. Winic W-680 (Silicon Image 680 based)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 240, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 8490 [size=8]
Region 1: I/O ports at 84a0 [size=4]
Region 2: I/O ports at 8498 [size=8]
Region 3: I/O ports at 84a4 [size=4]
Region 4: I/O ports at 8480 [size=16]
Region 5: Memory at 01301000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 01200000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: SiI_IDE
--
To unsubscribe from this list: send the line "unsubscribe linux-alpha" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
