> The patch 0e4c2eeb758a91e68b9eaf7a4bee9bd5ed97ff2b ("alpha/PCI: Replace
> pci_fixup_irqs() call with host bridge IRQ mapping hooks") breaks
> networking on Alpha for me. I have an Alpha Avanti server with tulip
> network card.
Matbe the map is wrong for Avanti? Is there some way to check that?
>
> The patch 0e4c2eeb breaks it so that I get MCE when the network card
> driver is loaded. The patch 814eae59 fixes the MCE, the system boot
> completes, but the network card doesn't receive any interrupts (and soon
> it reports warning about timeout on tx queue). All kernels in the 4.14
> branch have this bug.
Does some other IRQ icrease instead?
> Mikulas
>
>
> # cat /proc/interrupts
> CPU0
> 1: 3 XT-PIC i8042
> 2: 0 XT-PIC cascade
> 4: 752 XT-PIC ttyS0
> 8: 58118 dummy -RTC timer
> 10: 1613 XT-PIC ide0, ide1
> 11: 739 XT-PIC sym53c8xx
> 12: 5 XT-PIC i8042
> 15: 0 XT-PIC eth0 <--- note that the counter is zero
> PMI: 0 Performance Monitoring
> ERR: 0
>
> # lspci -vv
> 00:06.0 SCSI storage controller: LSI Logic / Symbios Logic 53c810 (rev 01)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 255
> Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at 8000 [size=256]
> Region 1: Memory at 01300000 (32-bit, non-prefetchable) [size=256]
> Kernel driver in use: sym53c8xx
> Kernel modules: sym53c8xx
>
> 00:07.0 ISA bridge: Intel Corporation 82378ZB/IB, 82379AB (SIO, SIO.A) PCI to
> ISA Bridge (rev 43)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:0b.0 Ethernet controller: Digital Equipment Corporation DECchip 21140
> [FasterNet] (rev 22)
> Subsystem: Digital Equipment Corporation DECchip 21140 [FasterNet]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 255 (5000ns min, 10000ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 15
> Region 0: I/O ports at 8400 [size=128]
> Region 1: Memory at 01302000 (32-bit, non-prefetchable) [size=128]
> Expansion ROM at 01280000 [disabled] [size=256K]
> Kernel driver in use: tulip
> Kernel modules: tulip
>
> 00:0c.0 Display controller: Digital Equipment Corporation DECchip 21030 [TGA]
> (rev 02)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping+ SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 255
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at 02000000 (32-bit, prefetchable) [size=32M]
> Expansion ROM at 012c0000 [disabled] [size=256K]
> Kernel driver in use: tgafb
>
> 00:0d.0 RAID bus controller: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host
> Controller (rev 02)
> Subsystem: Silicon Image, Inc. Winic W-680 (Silicon Image 680 based)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 240, Cache Line Size: 4 bytes
> Interrupt: pin A routed to IRQ 10
> Region 0: I/O ports at 8490 [size=8]
> Region 1: I/O ports at 84a0 [size=4]
> Region 2: I/O ports at 8498 [size=8]
> Region 3: I/O ports at 84a4 [size=4]
> Region 4: I/O ports at 8480 [size=16]
> Region 5: Memory at 01301000 (32-bit, non-prefetchable) [size=256]
> Expansion ROM at 01200000 [disabled] [size=512K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
> Kernel driver in use: SiI_IDE
>
--
Meelis Roos ([email protected]) http://www.cs.ut.ee/~mroos/
--
To unsubscribe from this list: send the line "unsubscribe linux-alpha" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
