Benjamin Herrenschmidt writes:
> No, he's not using the Linux kernel, but Russel's bootloader, which runs
> with data cache disabled, so this should not be an issue. I should put
> your hand on the chip's documentation, you probably lack some kind of
> initialisation (do you have a PROM providing the hw eth adress for
> example ? If you don't you'll probably have to set it up manually from
> the driver).
>From what I remember reading in the tulip driver, isn't the method by
which the media interface is selected very card specific and involves
magic numbers being poked into several registers?
I have seen some ethernet cards behave dead if the wrong type of media
is selected, and it sounds like this tulip is behaving in a similar way.
_____
|_____| ------------------------------------------------- ---+---+-
| | Russell King [EMAIL PROTECTED] --- ---
| | | | http://www.arm.linux.org.uk/~rmk/armlinux.html / / |
| +-+-+ --- -+-
/ | THE developer of ARM Linux |+| /|\
/ | | | --- |
+-+-+ ------------------------------------------------- /\\\ |
unsubscribe: body of `unsubscribe linux-arm' to [EMAIL PROTECTED]
