* Jeff Sutherland ([EMAIL PROTECTED]) [000428 00:08]:
> > > Do you use zImage or Image?
> >
> > Image, loaded at C0008000.
> >
> > > Is angel running on the board or not?
> >
> > No, we're using blob, and it appears to work flawlessly.
>
> This could be the problem. BLOB does not understand how to set up SDRAM
> chips, only EDO found on the SA1100. Memory will *appear* to work, but turn
> on the Icache and poof! As Nicolas mentioned, why aren't you using zImage?
> I don't care to wait that long for things to download, plus there are some
> things done for you in head-sa1100.S as Nicolas mentioned...
>
> //Jeff
>
Another idea might be to check that you setup the SDRAM correct,
failing to set the right row width will give you problems,
(although the bootloader is running fine) been there done that...
Another question, where should I put the stack pointer when I
boot linux, I am still having problems with booting zImage although
Image file works fine. (2.2.12 kernel)
/Per B.
unsubscribe: body of `unsubscribe linux-arm' to [EMAIL PROTECTED]
++ Please use [EMAIL PROTECTED] for ++
++ kernel-related discussions. ++
